Google for keywords "testbench setup vcds". You will find thread at R0$$ forum.
Hi, I started replacing background LEDs 2 years ago on VAG cars. I want to make something like test bench where I can test clusters, radios, climatronics, buttons etc. because I don't have that car that I'm working on it every time.
I need everything to light up so I'll need light switch and some other components like control units to test it.
My question is: Can somebody tell me what all I need to make test bench ? or have somebody this setup already made ?
Thank you for your replies.
Sorry for my bad english
Google for keywords "testbench setup vcds". You will find thread at R0$$ forum.
I can calculate ABS module codings for:
* Continental/Teves MK60EC1 and MK60;
* TRW systems in Passat B6 / B7 / CC /Tiguan;
* MK100;
* Bosch ABS8.2, ABS9.0 and ESP8.2, ESP9.0;
* EBC 460 (UP!, Mii, Rapid, CitiGo, Fabia, Toledo, etc) New!
* ... and other VW/Audi/Seat/Skoda modules.I can assist with repairing \/CDS interfaces.
Use can gateway to diagnose most systems, you can get it in ebay for 15 eur. Diag tool in and out you have many channels for comfort etc.
So I can get everything light up with CAN gateway ?
Yes, powers, gnd and can through gateway and you have comm with tester, then you can do active test, coding etc.
peetee25 (26th December, 2018)
Bookmarks