Renolink interface

**pakoto** · 16th March, 2019, 07:23 PM

original renolink uses internal s/n from red cable to activate. Each license associated to unique cable.
I suppose that blue cable is clone of one red cable using same s/n for all and license is also same for all. Gabi changes activation system, and all chinese blue cable stuck at this old version.

**R2D2R2** · 16th March, 2019, 08:07 PM

Originally Posted by pakoto

original renolink uses internal s/n from red cable to activate. Each license associated to unique cable.
I suppose that blue cable is clone of one red cable using same s/n for all and license is also same for all. Gabi changes activation system, and all chinese blue cable stuck at this old version.

stop to explain for nothing , red or blue use same chip : https://www.scantool.net/stn1110/

gabi made bad choies , software is not seriously protected , this guy want fast money ( online activation , he sell nothing , no dongle , no online activation ..... ) it's an amateur , 5 years of development for finish on £30 Aliexpress store !!!!!

Expert had advise him , but no store , just fast money ! BBBBOOOOOOMMMM in his face

**pakoto** · 16th March, 2019, 08:32 PM

original stn1110 has internal hardcoded s/n. Blue cable has original STN chip or cloned like chinese ford ELS27 with PIC24HJ128GP?

**kyo2019** · 18th March, 2019, 01:45 AM

does somebody has 1.69 for blue cable?

**ck32** · 18th March, 2019, 08:55 PM

Hello, What do you think about this post from another forum. They have a Renolink 1.0 working with obdlink and ELM ? Fake or a modifyed exe ?

https://www.autohacking.net/viewtopic.php?f=212&t=2394