I think he read the eprom from the dashboard.
"" VD1 3C0920860A 3C0920860A"""
Not from ECU EDC 16.
I think he read the eprom from the dashboard.
"" VD1 3C0920860A 3C0920860A"""
Not from ECU EDC 16.
Sorry guys,
It is possible my mistake,i read with vag K comander , but i'm not sure what module i read
Which is the easy solution? and by which tool?
Thank you in advance,
Alin
With the help of Vag Can Pro (OCF) you can read the immo pin from some ECM EDC 16, and using the Vag Dash Can 5.xx pin immo and eprom.
Of course there are other tools for this.
Hi all members is quite long time I’ve never be on the site. I’ve got wee problem and wander if any off you can give me an info. I’ve work in old vw passat b6 1.9 tdi and is problem with elv sometimes not Start I’ve change they 2 switch and naw the car not start is start and cut off sou the immo is a problem i think . I try delete immo I’ve desolder the 95320epprom and copy with carprog ive use ecu vonix to delete immo and the car not even start for 1 sec the way wo’s . Any 1 can help . Thanks
Last edited by dany81; 23rd October, 2021 at 05:14 PM. Reason: Spell wrong
Hello
I have a 2010 Passat, I would like to read the immo pin code
Vag K+can commander 1.4 I have a program but it is not compatible
What program can I use to read it?
Thanks
Read 95320 from comfort module and upload dump file
Pepelno Vds Pro
Mangarrufa Power Solutions
thank you is free
Is a trick with old and new steering lock assignement. Just read the forums and Ross-tech forum. Will get the answer and the car fixed. Just knock your old steering lock to be alive when you do this. Good luck!
Guys...... have a look for date of topic
need help
now my goal is to buy xp-005
who will help?
eliet2000 (9th May, 2023)
Bookmarks