Iveco Daily Speed Limit remove

**BeianM** · 24th December, 2018, 06:11 PM

Hi, can anyone remove the speed limit of this file. This vehicle is fitted with a tacho.
Many thanks in advance

**waldi1979** · 24th December, 2018, 10:01 PM

You can write this file - w/o limiter.

**BeianM** · 25th December, 2018, 08:17 PM

Hi, many thanks.
This is actually fitted in an Optare Alero minibus. Based on Iveco drivetrain. There are many owners in my group who have converted the bus to motorhome & need this limiter off.
Lots of different code in this file I assume it is a virgin file? I read on DK that unlimited file in ecu does not work when vehicle fitted with a Tacho.
Also, will this file allow Cruise Control?
I have been looking for Iveco software to do this but can't find a working download link.
I will try & let you know.
Cheers
Brian

**Meat-Head** · 25th December, 2018, 08:34 PM

Not sure but go pester lupusandu

**waldi1979** · 25th December, 2018, 09:44 PM

I tested this solution few times and it always was working but I don't know if CC will work (my cars didn't have it).

**BeianM** · 26th December, 2018, 04:20 PM

Yes working here too. Just come back from test drive. Can I flash this to other vehicles, looks like a virgin file. I'll fit a CC stalk & report back.
Thanks again for this.

**Meat-Head** · 26th December, 2018, 07:49 PM

What did you read and write this with please

**waldi1979** · 26th December, 2018, 08:38 PM

Originally Posted by BeianM

Can I flash this to other vehicles

Yes, if you have 814.043S engine.

Originally Posted by BeianM

looks like a virgin file.

Immo data are stored in 24C16.

**BeianM** · 26th December, 2018, 09:03 PM

Thanks again, could not see this ecu in nyo. Is this also map data, Bus seems more powerful, but could be my imagination. Could do with re-mapping.
Have found this https://www.digital-kaos.co.uk/forum...aily+tuned+map
Looks to work with Cruise Control

**BeianM** · 26th December, 2018, 09:04 PM

Originally Posted by Meat-Head

What did you read and write this with please

OBD1260 & EOBD2 soft (serial 1260) done in seconds.

**DrLoopyTunes** · 17th January, 2019, 04:00 PM

Hi Brian - I also have an Optare Alero and I am trying to remove the limiter, but I can only find an Iveco connector (round one with loads of pins)
How did you connect your OBD-II? Once I get connected, I assume I just download the old one (in case the new one doesnt work) and upload the new one?
Thanks!

**immokill** · 17th January, 2019, 05:53 PM

U can do it by wire

I read like rhat conect obd with wires to iveco cobector and it works.

**DrLoopyTunes** · 18th January, 2019, 02:20 PM

That's fantastic - thanks for your help!! Just need to check I have the right engine series before I screw it all up...!

**BeianM** · 11th July, 2019, 11:10 AM

Hi sorry I only just come back to this thread, how did you get on? Most adapters are wired incorrectly. I piggy-backed a obd socket onto the k-line & power.
I see you are in Poole, so am I