Kess 5.017 how to read SD card or create a new SD card

**joker01** · 14th April, 2019, 12:27 PM

Originally Posted by morgano

Try running WinHex "as Administrator", that will allow you to access volumes RAW.

already tried ... same mistake.
i use winhex 10.6
another program to try to use ???

**bergbahn** · 14th April, 2019, 01:51 PM

to run WinHex as Administrator right-click on winhex, properties

**joker01** · 14th April, 2019, 02:22 PM

wwweeeeee beer for all guys !!!!!
with a new version of winhex I succeeded !!
I had changed various cards sd, pc but the sw version had not occurred to me ahhahaha
it's a nice forum ... you are strong !!!
thank you all for your help in particular to the great morgano !!!!!

heteromies · 14th April, 2019, 10:03 PM

How to get this work bigger than 2GB card? I have tried 4GB, 32GB,64GB, but when tried to get files from ksuite, EEFFACE -error show up.

With 2GB card no any problems, have done some card's all ready. SO what i do wrong with larger cards?!?

**morgano** · 14th April, 2019, 11:50 PM

Originally Posted by heteromies

How to get this work bigger than 2GB card? I have tried 4GB, 32GB,64GB, but when tried to get files from ksuite, EEFFACE -error show up.

With 2GB card no any problems, have done some card's all ready. SO what i do wrong with larger cards?!?

Cut first 100MB of the images and work with them.

heteromies · 15th April, 2019, 12:10 AM

Originally Posted by morgano

Cut first 100MB of the images and work with them.

Hmmm, maybe i wrote incorret.... I mean when card is filled with 00 in winhex and card is in Kess and when start ksuite that error coming. I can't get kess to write nothing to card, because that error.

**morgano** · 15th April, 2019, 08:13 AM

Ensure cards make proper contact on kess pcb sd reader and try starting ksuite 2 or 3 times until it starts without the exception error.

Other way is go the CID way, faster, cleaner, less error prone

**joker01** · 15th April, 2019, 11:53 AM

No problem with 4gb.....restart ksuite 2/3 time as suggested

**pocinas** · 15th April, 2019, 01:12 PM

Or what i tested yesterday, which dont know earlier.

Put card filled 00 to Kess and just connect Usb cable, dont turn on ksuite, just this should record/save new data content on sd card enought to next step.. then put card to sd reader and go fallow next step, the first 13 lines start from 00005070 and end 000005130 (apologize if i put too many zeros)

heteromies · 15th April, 2019, 01:30 PM

Originally Posted by joker01

No problem with 4gb.....restart ksuite 2/3 time as suggested

Have done many size cards with many times. Also with many ksuite versions... But still same problem. Cannot understand why bigger than 2 GB cards not working.

heteromies · 15th April, 2019, 01:32 PM

Originally Posted by pocinas

Or what i tested yesterday, which dont know earlier.

Put card filled 00 to Kess and just connect Usb cable, dont turn on ksuite, just this should record/save new data content on sd card enought to next step.. then put card to sd reader and go fallow next step, the first 13 lines start from 00005070 and end 000005130 (apologize if i put too many zeros)

OK, will test this next.

Testing this, there is nothing data, just zeros.

**pocinas** · 15th April, 2019, 01:39 PM

Originally Posted by heteromies

Have done many size cards with many times. Also with many ksuite versions... But still same problem. Cannot understand why bigger than 2 GB cards not working.

I used every time.4gb card and yes sometimes ksuite run to.menu after 2...3 times tried. If still.dont maybe you have nxp chip bricked... p.s why you want generate new image? Just to incase or you old something heappends? You have old card and work ok?

heteromies · 15th April, 2019, 01:52 PM

Originally Posted by pocinas

I used every time.4gb card and yes sometimes ksuite run to.menu after 2...3 times tried. If still.dont maybe you have nxp chip bricked... p.s why you want generate new image? Just to incase or you old something heappends? You have old card and work ok?

Kess work well with china card. I have all ready test with two interface, no difference. Tools works with china cards, so problem are somewhere else.

I just wanna use genuine card with Kess. These china card are quite poor quality.

**morgano** · 15th April, 2019, 04:29 PM

Originally Posted by heteromies

Kess work well with china card. I have all ready test with two interface, no difference. Tools works with china cards, so problem are somewhere else.

I just wanna use genuine card with Kess. These china card are quite poor quality.

Read CID of one of those cards and send me.

**tkmmazda** · 15th April, 2019, 04:45 PM

Hello everyone.Some time ago I solved the problem with the card. Exactly the same, over 2Gb EEEFace.
I managed to create a 2GB card, but no more.
I used the first page files. Is protocol 445 working for you? The origo Chinese card works for me,
but on the new no.
I can provide the image of the original Chinese.