Kess 5.017 how to read SD card or create a new SD card

[elmer9]

it does not hurt to press the THANKS button

you are right, sorry

guys a question, after all the work, how can I see if the file is good?
I put sd in kess, I open ksuite and then what should I check?
Thanks again

[morgano]

guys a question, after all the work, how can I see if the file is good?
I put sd in kess, I open ksuite and then what should I check?

That you can select any car for id or read and not have “protocol not found” error but all works.

[elmer9]

tranks morgano
ended the guide, it doesn't let me into the sd with the pc, it tells me "format disk" but on the kess it works.
it's normal? is it the same to you?

[bergbahn]

... it doesn't let me into the sd with the pc, it tells me "format disk" but on the kess it works.
it's normal? is it the same to you?

it´s normal, you encrypted the sd !!! PC can not read

[elmer9]

tranks bergbahn
I didn't check on the machine, but it finds the protocols with fat32, I assume it works
then check on car

[pocinas]

I would like share my INSTRUCTION because for me this Instruction from 1st post and archives SD-cardfiles and Tool.txt exacly file READMY and Vieo Creation microSD for KESS 5.017 and KTAG 7.020.mp4 with incomplete understanding because Video is in Russian Language and in Video Person use 128Mb card, but my card was 4GB so i was stuck in point 10 from READMY instuction, look below i MODIFIED READMY file and added more important infos

1. erase in zero new Memory SD CARD so Open Winhex press F9 - open SD CARD reader than press CTRL+L (EDIT---> fill disk Sector) and choose "00" press Ok and Confirm - Wait to Fill all sectors to SD CARD
2. insert SD CARD into device (KESS/KTAG), connect to PC and start Ksuite (the best with Internet Switch OFF/disabled), Try to Entry in Any Vehicle there should Grey Protocols
3. remove SD CARD from device (KESS/KTAG) and insert into PC/SD READER
4. open memory card in HEX-editor, Press F9 and open CARD SD AGAIN
5. copy/select block 000000D0 - 0000019F should 13 Lines and using CTRL+ SHIFT+N (EDIT--> COPY ALL---> INTO NEW FILE) save new file give name "Key"
6. place file "Key" in folder with "KeyFileGenerator.cmd" and start "KeyFileGenerator.cmd"
7. after work of a script you will receive new file "KeyFile.bin"
8. format SDcard in FAT (4Gb can Format to FAT/FAT32) Cards 8GB and more support NTFS, so dont sure how format Card to FAT if is Bigger than 8GB, so my recomendations is Using maximum 4Gb Micro SD Cards
9. copying folders from archive "Ksuite" or "Ktag" to formated sd card
10. make new SDcard image with Files in HEX-editor so

IMPORTANT
Again Press F9 and choose SD CARD EDIT than---> EDIT---> Define block --- choose on top (look attached Photo) ---- BEGINNING OF FILE - 0 and END OF BLOCK 793FFFF Press OK
than CTRL+ SHIFT+N (EDIT--> COPY ALL---> INTO NEW FILE) and Save new file like "decript_sd.img"
than you file should Created /received 128mb
if you not do Define Block 0-793FFFF you file will every time BIG how is you memory card (example 4GB which is too big using XOR)

11. start XorFiles.exe and choose you
filename 1 - KeyFile.bin
filename 2 - Decript_sd.img
filename 3 - Cript_NEW_SD.img - file which will be Genarated
START

12. use JUST Win32DiskImager program to write 128mb IMAGE to your SD CARD
Some another programs like imageusb or Winhex to write image on you SD, dont sure can be work, but Win32DiskImager can quarantee Write IMAGE correclty to you SD

[bergbahn]

@pocinas
Some people can not read your text !

[pocinas]

@pocinas
Some people can not read your text !

Apologize for My Language, tried The Best how i can stick together all Info, hmmm

[bergbahn]

Apologize for My Language, tried The Best how i can stick together all Info, hmmm

sorry, your language is OK

The Forum Style = " darkcore" thats OK with white font, but "Default Style" = White Background then your white font is not visible, look at my Picture

[elmer9]

excellent, in the video with the key generation.cmd file it was not well explained how to create sd memory with a size greater than 128 mb
with this there are no more doubts

[pocinas]

sorry, your language is OK

The Forum Style = " darkcore" thats OK with white font, but "Default Style" = White Background then your white font is not visible, look at my Picture

AAA Right, there was problem. I changed now all my text to One Fonts, so should be Clear for ALL :-D

[siriusx]

I would like share my INSTRUCTION because for me this Instruction from 1st post and archives SD-cardfiles and Tool.txt exacly file READMY and Vieo Creation microSD for KESS 5.017 and KTAG 7.020.mp4 with incomplete understanding because Video is in Russian Language and in Video Person use 128Mb card, but my card was 4GB so i was stuck in point 10 from READMY instuction, look below i MODIFIED READMY file and added more important infos

1. erase in zero new Memory SD CARD so Open Winhex press F9 - open SD CARD reader than press CTRL+L (EDIT---> fill disk Sector) and choose "00" press Ok and Confirm - Wait to Fill all sectors to SD CARD
2. insert SD CARD into device (KESS/KTAG), connect to PC and start Ksuite (the best with Internet Switch OFF/disabled), Try to Entry in Any Vehicle there should Grey Protocols
3. remove SD CARD from device (KESS/KTAG) and insert into PC/SD READER
4. open memory card in HEX-editor, Press F9 and open CARD SD AGAIN
5. copy/select block 000000D0 - 0000019F should 13 Lines and using CTRL+ SHIFT+N (EDIT--> COPY ALL---> INTO NEW FILE) save new file give name "Key"
6. place file "Key" in folder with "KeyFileGenerator.cmd" and start "KeyFileGenerator.cmd"
7. after work of a script you will receive new file "KeyFile.bin"
8. format SDcard in FAT (4Gb can Format to FAT/FAT32) Cards 8GB and more support NTFS, so dont sure how format Card to FAT if is Bigger than 8GB, so my recomendations is Using maximum 4Gb Micro SD Cards
9. copying folders from archive "Ksuite" or "Ktag" to formated sd card
10. make new SDcard image with Files in HEX-editor so

IMPORTANT
Again Press F9 and choose SD CARD EDIT than---> EDIT---> Define block --- choose on top (look attached Photo) ---- BEGINNING OF FILE - 0 and END OF BLOCK 793FFFF Press OK
than CTRL+ SHIFT+N (EDIT--> COPY ALL---> INTO NEW FILE) and Save new file like "decript_sd.img"
than you file should Created /received 128mb
if you not do Define Block 0-793FFFF you file will every time BIG how is you memory card (example 4GB which is too big using XOR)

11. start XorFiles.exe and choose you
filename 1 - KeyFile.bin
filename 2 - Decript_sd.img
filename 3 - Cript_NEW_SD.img - file which will be Genarated
START

12. use JUST Win32DiskImager to write 128mb file to your SD CARD
Some another programs like imageusb or Winhex to write image on you SD, dont sure can be work, but Win32DiskImager can quarantee Write IMAGE correclty to you SD

Thanks for your info man, sounds clear and let me try ...
May I know the final step “write the file to your sd card” can u give me a step by step instruction?
Coz I didnt try to write an image to the sd card....I thought was just pulling the file from the computer at the very begining.


從我的iPhone使用Tapatalk 發送

[pocinas]

Thanks for your info man, sounds clear and let me try ...
May I know the final step “write the file to your sd card” can u give me a step by step instruction?
Coz I didnt try to write an image to the sd card....I thought was just pulling the file from the computer at the very begining.


從我的iPhone使用Tapatalk 發送

Hey.
Don't copy IMAGE file to sd card.

After point 11 my instruction you should have 128mb final File (IMAGE) so using "Win32DiskImager" program than you choose this Image File than volume to sd card and just WRITE... writing is arround 10-15sec. After this just put in sd card to socket you kess/ktag. Hope its more clear now.

[tayloravila]

hello, I'm having trouble downloading, do not have a link in the cloud?

[bergbahn]

hello, I'm having trouble downloading, do not have a link in the cloud?

check your private Messages