Kess 5.017 how to read SD card or create a new SD card

[bergbahn]

The eeeface problmen nirmally is poor contact of the sd with the sd reader on the pcb.

Take out sd, clean it with isopropyl alcohol and also the contact of the sd reader on pcb, bend also if needed a litrle but the contacts to ensure they make good pressure on sd when closing.

If all that not solve your problem then maybe the chinese sd became deffective and need new sd and my update pack to solve problem.

Pass to open archive is “***********”

Please don’t spread the password.

Regards

Please don’t spread the password ?!?!

[morgano]

Lol my mistake, thought was answering to a private.

Let it be. Pass open to everybody now.

Regards

[caja88]

The eeeface problmen nirmally is poor contact of the sd with the sd reader on the pcb.

Take out sd, clean it with isopropyl alcohol and also the contact of the sd reader on pcb, bend also if needed a litrle but the contacts to ensure they make good pressure on sd when closing.

Pass to open archive is “ByMorgano@DK”

Please don’t spread the password.

Regards

Took a other formated sd card,gonna clean it,an give a try with your update pack. Thanks,and,we wont spread your password

[bergbahn]

first post edited

[caja88]

thanks, Morgano
i also added same archive for kreating sdcard Ktag 7.020

SDcard Ktag 7.020

just extract files in UPDATE folder

pass= thanks+rep

Thank you mate,could i get the pass

[caja88]

Updated with morganos files,everything fine. But guys HEEELP,need to make backup on my edc17c46, starts backup or read till 10 percent and then message displays CAN Frame reception timeout,i know im off topic,but need help,im without car
Protocol 199

[harnaga]

SDcard Ktag 7.020

this link is not active can please send me active link or contact me in PM i have big problem with my ktag

[morgano]

Updated with morganos files,everything fine. But guys HEEELP,need to make backup on my edc17c46, starts backup or read till 10 percent and then message displays CAN Frame reception timeout,i know im off topic,but need help,im without car
Protocol 199

Need reword kess pcb with good components.

[caja88]

On ktag says micro protection removal failed, any clue about that?

[harnaga]

nobody have link for the sw SDcard Ktag 7.020

[harnaga]

On ktag says micro protection removal failed, any clue about that?

what ecu try protocol 199

[caja88]

Edc 17 c46

[Jerak]

Just to pass on some info, I compared morgano's protocols to tkmmazda's and they are exactly the same at a byte level.
Bergbahn's differ for FL0468.prt, FL0497.prt and FL0513.prt.

I don't know which version is more up-to-date though.

Also I didn't try morgano's install method so I don't know if the \System folder gets filled with the missing .crp and .csv files.

[over73]

I am bored of all this sh1t.

Here easy way to recover your kess 5.017 SD Card.

Just put fat32 formatted SD card into kess, decompress the files provided HERE in the ksuite update folder, plug kess and start ksuite. SD will be made from scratch effortless. No need any tool cracked or not, no need any other file, no need know SD CID, no need HEX experience,...etc, just need computer, kess and sd card with this update pack.

Pass in PM after have given thx and rep to this post.

Download files HERE.

Regards,

thx i m test this

[Digital Under]

nobody have link for the sw SDcard Ktag 7.020

Link update
SDcard Ktag 7.020