Peugeot pin from vin

**ecufix** · 16th January, 2019, 03:12 PM

Please can you give the pin from this vin for a 207 . VF3WAKFUC33475889 thanks ,regards

**rafal** · 16th January, 2019, 06:58 PM

Originally Posted by ecufix

Please can you give the pin from this vin for a 207 . VF3WAKFUC33475889 thanks ,regards

in your dream.....go to dealer for pin by vin

**ecufix** · 17th January, 2019, 10:57 AM

Please extract pin from attached dump from st10f280 read with xprogm, thanks, regards

**rafal** · 17th January, 2019, 11:47 AM

H19N...............

**ecufix** · 17th January, 2019, 12:17 PM

Originally Posted by rafal

H19N...............

Thank you very much

**ecufix** · 17th January, 2019, 01:55 PM

Please put into virgin state thanks ,regards

**kredka74** · 17th January, 2019, 02:35 PM

Hi!
What U gonna do? Replace BSi, ECU, Keys? pin working?

**ecufix** · 17th January, 2019, 05:53 PM

I think the cheapest solution is to keep the replacement BSI as is (have the pin for it) seeing that to obtain a virgin bsi file is so difficult to get, virgin the ecu ,precode new key chips and learn keys via obd.

**ecufix** · 26th January, 2019, 08:41 PM

Thanks for all the input I now have the car running again with the new bsi which i changed because of the wind screen wipers not working , the only improvement now is that they only work on high speed ? Looking at the steering collums data stream I can see the the low speed and intermediate and high speed being switched , any ideas?

**stoyanov** · 27th January, 2019, 03:16 PM

Originally Posted by ecufix

Thanks for all the input I now have the car running again with the new bsi which i changed because of the wind screen wipers not working , the only improvement now is that they only work on high speed ? Looking at the steering collums data stream I can see the the low speed and intermediate and high speed being switched , any ideas?

Strange think,you have to change bsi for this but windscreen wiper motor is powered by bcm module in engine compartment.
Did you check fuses there or replace bcm for test?

**ecufix** · 2nd February, 2019, 03:20 PM

Originally Posted by stoyanov

Strange think,you have to change bsi for this but windscreen wiper motor is powered by bcm module in engine compartment.
Did you check fuses there or replace bcm for test?

Yes checked all fuses and tested the front bcm as far as I could,after changing the inside bsi I now have wipers but only on high speed.