Try this map and report..
Edc16c8
I have blanked egr
good guy from here removed egr in my soft, but i think is something wrong, cause i have:
- still too much measured air quantity than desaired, its about 2,5 more measured, like in error p1238 (dtc 1238 and 0404 are removed)
- if i unplug egr eletronics, egr working like that: 1%-50%-1%-50%-1%-50%, connected always closed 1%, so im drivin with pluged egr*(but still blanked)
Before blanking egr, measured intake air quantity = desired.
In Attachments ori file, and with egr mod, please take a look, egr is removed correctly? Thanks!
airintake.jpg
Try this map and report..
Last edited by cupsi; 16th January, 2019 at 08:57 PM.
That is a real 'picture' from maf sensor.U should see that maf is higher because there no more gases from egr.All is ok
Try to see maf on acc and car not started,i just see now that maf is way to high!
Last edited by banelab; 16th January, 2019 at 09:07 PM.
Rly ok? Are You sure that blanked EGR in Fiat engine JTD edc16c8 = total mess MAF sensor (readings out of range)
I have high measured air all time, look at pic form MES: green line = desired, red measured at normal driving
XxY.jpg
I DONT know what you mean - 'see maf on acc', there will be mesured 0. I dont get it.
Your EGR OFF
Pass PM
Last edited by TuningInside83; 17th January, 2019 at 04:12 PM.
TuningInside83 has exceeded their stored private messages quota and cannot accept further messages until they clear some space.
so i cant
u moded my ori file, or fix moded version?
pm me pass for file, v.thanks
ok i sent pss pm
Bookmarks