Hello,
Attached flash file of Hyundai Tucson 2010, Continental ECU, ecu replaced before, vin updated using G-scan to car, so old vin can not get, please help me to extract pin from Flash file attached.
thanks in Advance.
Hello,
Attached flash file of Hyundai Tucson 2010, Continental ECU, ecu replaced before, vin updated using G-scan to car, so old vin can not get, please help me to extract pin from Flash file attached.
thanks in Advance.
How did u read this ecu please ?
Actions speak louder than words
Ktag
Sent from my iPhone using Tapatalk
ttzag (27th February, 2015)
did you tried to get pin with avdi ?
can you post here where is pin out to read this ecu please ?
Actions speak louder than words
ImageUploadedByTapatalk1425049952.455720.jpg
Sent from my iPhone using Tapatalk
GameTheoryOptimal (29th January, 2019), ttzag (27th February, 2015)
you uploaded from tapatalk so its a very bad resolution
Actions speak louder than words
Try this photo ImageUploadedByTapatalk1425105849.013729.jpg
Sent from my iPhone using Tapatalk
GameTheoryOptimal (29th January, 2019)
hey guys! I have a very similar board... customer wants to install a used ecm on his 2015 hyundai sonata hybrid (2.4L), original and used one have different p/n (and it comes from a 2011), but they have same board.
I would like to clone both MCU to make sure I have the proper flash file (and of course to make it start), but I'm not sure I'll be able as one mentioned there is OTP section... and I don't have that exact same board as pictured here. mine is a SIM2K-143.
original: 39155-2G917
second hand: 39155-2G910
they both have a MPCZ561MZP56 and a tricore SAK-TC1738-192
I'll post picture soon.
I have a clone FGtech and a HQ clone KTAG... and some more i forget.
thanks for any input!
Last edited by GameTheoryOptimal; 29th January, 2019 at 01:34 AM.
Bookmarks