need help polo 1.4 magneti marelli

**uadi** · 14th February, 2019, 10:16 AM

hi all

i have this vw polo from 1999 whose key doesn't work anymore. i tried to read the immo but the cluster is locked.
any ideas?

**garage des ange** · 14th February, 2019, 10:34 AM

Hi my friend, what is the eeprom in which is in the dashboard

**uadi** · 14th February, 2019, 11:00 AM

in the dash i seen a 24LC08. I didn't open the ecu yet

**garage des ange** · 14th February, 2019, 11:48 AM

Why not program a MEGAMOS 48 transponder to start the car

**antlio** · 14th February, 2019, 04:54 PM

Post eeprom 95080 from ecu and i do it without immo .

regards

**Stelaras26** · 14th February, 2019, 05:31 PM

Originally Posted by antlio

Post eeprom 95080 from ecu and i do it without immo .

regards

normally it would have iaw.4mv/4lv/4tv or something like that!

**jakesman** · 14th February, 2019, 05:40 PM

Originally Posted by uadi

hi all

i have this vw polo from 1999 whose key doesn't work anymore. i tried to read the immo but the cluster is locked.
any ideas?

locked ? waiting time? or u can not get aces to it ? what tool u use

**uadi** · 15th February, 2019, 09:29 AM

Originally Posted by jakesman

locked ? waiting time? or u can not get aces to it ? what tool u use

I tried with carprog and i get security access error. I can access with vcds but I need pin to reprogram the key.

**uadi** · 17th February, 2019, 02:29 PM

do i have to unsolder the eeprom or i can read in-circuit? i have carprog full
thanks

Originally Posted by antlio

Post eeprom 95080 from ecu and i do it without immo .

regards

**getafish01** · 17th February, 2019, 03:30 PM

Read the pin for m the ECU then you will have to leave ignition on for 20 minutes before coding key

**uadi** · 17th February, 2019, 04:25 PM

i still try to find a way to read this 95080

is hard to be a newbie in programming

**kiszka** · 17th February, 2019, 04:34 PM

Originally Posted by uadi

i still try to find a way to read this 95080

is hard to be a newbie in programming

undress, ecu and find an eeprom

**uadi** · 17th February, 2019, 05:38 PM

ok this is the beast stripped

on the back side i think is the resonator that must be shorted in order to read the eeprom (as said here: http://www.codecard.eu/prod_48.html) but i am not so sure

**robert1232** · 17th February, 2019, 05:41 PM

unsolder this memory and read
send file here
som friend help u 100%
no file no help

**uadi** · 18th February, 2019, 10:42 PM

my carprog don't seems to read this eeprom.been tryng for 2 days now. any other programmer?

Thread: need help polo 1.4 magneti marelli

Thread Tools

Display

need help polo 1.4 magneti marelli

The Following User Says Thank You to robert1232 For This Useful Post:

Bookmarks

Bookmarks

Posting Permissions