need help polo 1.4 magneti marelli

**daniersms** · 18th March, 2019, 05:35 AM

Originally Posted by uadi

i read the 24c04 eeprom
is the pin inside?

Pin Code - 1599

**uadi** · 18th March, 2019, 09:41 PM

Originally Posted by daniersms

Pin Code - 1599

I will try and report the result in 2 weeks ✌
Thanks again

**daniersms** · 19th March, 2019, 05:32 AM

Originally Posted by uadi

I will try and report the result in 2 weeks ✌
Thanks again

Just remember the 0 before the 1 for the pin --- so pin is 01599

**uadi** · 30th March, 2019, 10:39 AM

the pin is correct

must wait the new transponder

**uadi** · 2nd April, 2019, 09:10 PM

the trasponder id44 came today but i think the immo box is defective.
the waiting time is good, reader coil status allways good even unplugged (this is strange).
i think the immo don't see the transponder anymore.
if i write the 24c04 dump into a sh box it wil work or i must have the whole kit (immo, ecu, cluster)?
is there any way to do immo off in the immobiliser?
thanks

**uadi** · 6th April, 2019, 03:46 PM

hello all
i have the new immo box can someone help with pin code?
i bougt also 2 id 44 transponders from ebay but i think they are not precoded.
also the client lost the old transponder.
how can i precode the new ones?

**keyzex** · 6th April, 2019, 05:32 PM

Originally Posted by uadi

hello all
i have the new immo box can someone help with pin code?
i bougt also 2 id 44 transponders from ebay but i think they are not precoded.
also the client lost the old transponder.
how can i precode the new ones?

The pin is (0)8326 see picture.

**uadi** · 6th April, 2019, 07:24 PM

ok finally the car starts
the client found the old transponder, i wrote the dump from the old immo box to the new one and reprogrammed the key.
thanks everyone for help !!!!!