Mib STD2 PQ + NAV - need help

[ollync]

Well, i think it's worth to try to switch eMMC if you can do BGA. EEPROM is 1:1 copyable, so i guess it's not necessary to switch them.
There may be another copy of that damn keys in other chips - who knows. But if you really want to get this sucker to work then try with that eMMC.
Example of RMPB record below:
Attachment 597468

How did you read RPMB partition?
I figured it out to connect the emmc to rpi , but when i try to read rpmb partition with mmc utils, i get error.
I am trying to experiment a little with the emmc from the damaged unit.

[majonez]

How did you read RPMB partition?
I figured it out to connect the emmc to rpi , but when i try to read rpmb partition with mmc utils, i get error.
I am trying to experiment a little with the emmc from the damaged unit.

I used patched mmc utils code from github, because original one didn't work for me. You can read RPMB without access key. Only read but not write unless you have proper rpmb key.

[minsir]

I used patched mmc utils code from github, because original one didn't work for me. You can read RPMB without access key. Only read but not write unless you have proper rpmb key.

would you please share the device "hd1" that you read out ?
my mail address: xxxxxxxxxxx
thank you !

[Medions]

It is possible to make conversion from US to EU ?

[Maartinj]

It is possible to make conversion from US to EU ?

yes, possible

[Medions]

Next question how remove all key from unit ?

[ollync]

What do you mean with „ all key“ ?


Sent from my iPhone using Tapatalk Pro

[Medions]

I want erase all swap (fec) from unit.

[Medions]

MST2_EU_VW_PQ_P0253T_3G0919360DL

[attilaa0]

Hi!Is there anybody who read emmc and what programmer used?I have this unit and keep restarting ,what solution is for that?Thanks!

[offsystem]

It is possible to make conversion from US to EU ?

I have not found a solution till now.

I patched sw.download manager but it I just get N/A on all modules for update

Is it possible clone EU unit if I write mmc, flash eeprom?

Which data is stored in flash mx29GL??

[Medions]

I all do it Variant config not in all this chip. If you patched you will need edit metainfo.txt like this

[cpu\customerupdateinfos\11\default\Dir]
Link = "[cpu\customerupdateinfos\10\default\Dir]"


[cpu\customerupdateinfos\13\default\Dir]
Link = "[cpu\customerupdateinfos\10\default\Dir]"

add
[cpu\customerupdateinfos\14\default\Dir]
Link = "[cpu\customerupdateinfos\10\default\Dir]"

P.S. May be variant and region in RPMB.

then n/a dissapear but when you start upadate you recive other ploblem ))

[offsystem]

I all do it Variant config not in all this chip. If you patched you will need edit metainfo.txt like this

[cpu\customerupdateinfos\11\default\Dir]
Link = "[cpu\customerupdateinfos\10\default\Dir]"


[cpu\customerupdateinfos\13\default\Dir]
Link = "[cpu\customerupdateinfos\10\default\Dir]"

add
[cpu\customerupdateinfos\14\default\Dir]
Link = "[cpu\customerupdateinfos\10\default\Dir]"

P.S. May be variant and region in RPMB.

then n/a dissapear but when you start upadate you recive other ploblem ))

Thx I will try it,

I thought in protected mmc part are just FEC codes, this is not the problem can be written with vcp.

In which chip you are doing it?

[freshnavi]

Thx I will try it,

I thought in protected mmc part are just FEC codes, this is not the problem can be written with vcp.

In which chip you are doing it?

How to add FEC codes via VCP?

[offsystem]

I copied now mmc, flash and Eeprom from Eu unit to US unit, but just start screen and reboot. Also emergency not takes EU Fw card ....