I think yours too is full
I think yours too is full
Hello,
what you mean with bad contacts? Wrong pinouts or whatever?
I did all like in OP, and same set as baleyba BDM used, all connected right way, VCCQ right connected for read-write, tried with USB card reader TRanscend, micro SD Card adapter, different brands of car creaders, and different brands of micro SD card readers, but no way that PC, laptop anything detect when connect to USB or emebeded Card reader ...
When check pins on side of micro SD adapter or usb card reader and pinouts on mobo it has connection, and right pinouts, like dat0, cmd, clk, gnd, vcc, all connected as in OP, tried even all 8x pinouts, same situation...
So if anyone of you has some tip, what else can try , or what i do wrong, to check, and re-try to make this working. When check by multi-meter pin of micro SD adapter and pinout on mobo, no 3.3v, but whole time all connection 0, what is here wrong, that no 3.3v?
Thanks!
Maybe current draw from board exceeds what adapter can supply and adapter cuts power to the board?
Wrong connection?
What board do you have? Post photo with connections .
Did you try to measure Vcc with the line disconnected from board?
Sent from my iPhone using Tapatalk Pro
You were absolutely right, wrong connection, wrong some pinouts i connected, and now all ok, did as you explained in OP, and all ok, connection work, dump made, thanks to you and your great work in this thread.
Once tnx for your amazing work, and help many people in this thread to fix their problem by emmc dump .
I'm trying to read EMMC on a Technisat ZR unit. I tried several card readers, but none of them sees the EMMC. Every says the card reader has no card inserted.
Could you help me checking my pinout?
I have connected it like this:
ZR_board.jpg
CardReader.jpg
On the board I have connected the VSS and +3.3V probes together.
On the card reader I have connected the pins 3 and 6 together.
Thanks in advance!
Nobody can help?
I have a Technisat "5C0 035 200" (no navigation model) running MST2_US_VW_PQ_P0245T firmware.
I'm in Canada, so not looking for the usual EU conversion. Looking to retrofit into my 2013 Golf SportWagen.
Does anyone have a copy of this firmware, or P0247T, or newer? Thanks!
Last edited by killab; 4th July, 2020 at 02:34 AM.
I have MST2_US_VW_PQ_P0253T
If you don't like it * close your eyes
--- Geros dienos ! ---
Regarding rpmb partition in emmc. I just replaced an emmc on a zr unit and all fec lost. Now i’m thinking to make a custom emmc image with an extra 128k partition and to mount it as /dev/hd1. Did anyone try this ?
Make unit work without FEC
Last edited by punkforever; 25th August, 2020 at 08:02 PM.
MIB 1/2 Solution
CP-OFF, Activation CarPlay Android auto map care, US/EU conversion
WhatTheFec, Advanced Green Menu
Please tell me how to "switch the ignition on" on the table? Need to check the functions of Bluetooth and some others.
Thank you!
Bookmarks