Ligier JS50 2016

[markony79]

dont have eeprom , have MCU 9S08AW32 , place on pbc for 24c04 is empty , maybe ecouse is new mcu inside

read on bdm pins

original km 72548

need 14351km

thanks

[drpeter]

dont have eeprom , have MCU 9S08AW32 , place on pbc for 24c04 is empty , maybe ecouse is new mcu inside

read on bdm pins

original km 72548

need 14351km

thanks

drive 10 km post again.

[markony79]

yes, i will do it , i just wait to get the car here, i was get only dash

p.s. i see you was did almost same dash , but in your dash was have 24c04 , in mine dont have

is it same pcb like mine ? did you save photo from your pcb ?

regards
M

[drpeter]

yes, i will do it , i just wait to get the car here, i was get only dash

p.s. i see you was did almost same dash , but in your dash was have 24c04 , in mine dont have

is it same pcb like mine ? did you save photo from your pcb ?

regards
M

Sorry no photo

[markony79]

check now here

i drive the car , more then 100km

and post bouth files

need around 14000km

[drpeter]

check now here

i drive the car , more then 100km

and post bouth files

need around 14000km

Are you sure this is the same car? very nasty one. will take some time.

[markony79]

check the photo

or , i will solder one eeprom 24c04 on the place on pcb IC5 , powerr up the dash ,and wait maybe the MCU will write some dump in 24c04

older dash have the 24c04 on this place

i wil try it

in mcu is to many bytes changed after drive it car

[drpeter]

check the photo

or , i will solder one eeprom 24c04 on the place on pcb IC5 , powerr up the dash ,and wait maybe the MCU will write some dump in 24c04

older dash have the 24c04 on this place

i wil try it

in mcu is to many bytes changed after drive it car

yes you can try, this looks like a random code generator :-).

[markony79]

everything work good, but after i read out 24c04 its still empty ,

no solutions fot this ... i will try drive now only 1km , and check it

Dr Peter, Thanks for your support

[didi_du_93000]

Hello,

any news about this dash?

Do you have pinout for test dash on bench?

[didi_du_93000]

I don't understand why you have put the "memory map" and not the "flash memory".

Also if you test to read the "flash memory using U-UPAS you will see the value is different all times.

[didi_du_93000]

any help?

I have take a car with 999 999km.

I need good dump please.

[buzz84]

hello i am looking to modify dash + bsi go up on ligier js50 go to 999999km i will want 20200km if possible if someone has soft for mod thank you

[buzz84]

no one at dp4 to see if its managed to tie up by dump?

[didi_du_93000]

I have dp4 and can't do it.

With Tapatalk