Hi, trying to make a key to a BMW 528i 1998 I have deleted the ROM area of an EWS3 with Motorola 2D47J micro.
then I read the DME MS41 of the engine, I had an eeprom 24c04 and a flash 28F200AZ.
I got a virgin file for the EWS3 to which I recorded 2 keys, but I'm missing the ISN to twin both modules.
could someone filter the ISN from the DME?
or could they pass me an immo off?
THANK VERY MUCH
Last edited by apreso; 22nd February, 2019 at 03:45 AM.
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
I think yes... I read it to a friend with Etool full flash.
Kiszka Did you see mistakes?
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
ups.... the one who read it, knew what he was doing ... but he could have been wrong.
in case it corrupts the reading of the Flash, is there an immo-off that can work?
Excuse me the questions I ask, but it's the first immo off, which I have to do
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
I do not understand what the CAN AM has to do with the BMW?
or was confused from file?
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
apreso (23rd February, 2019)
yes. I understand, I work constantly with files ... I just never did an off to BMW
do you have a file with off, to put that flash that works for that DME MS41 5WK9 0322 index10?
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
Learning in this car the ECU takes a maximum of 10 minutes (need inpa or any K- line adapter),no need to open anywhere.
Instead, you are doing nonsense, when desolder flash - you get 80 % dead it and engine control unit.
Great master !!! Like most here.
apreso (23rd February, 2019)
Bookmarks