Mitsubishi outlander/asx pcf7952
- original pcb 315mhz OK
- china pcb FAIL "chip error"
Fails and success feedback remote renew with KD-X2
Alfa
- only pcf7941 OK
- chip with 7107510 FAIL "chip error"
engineer please update!
Mini cooper
3456367-02 868mhz OK
Audi
smartkey 868mhz, chip pcf7945ac1500, written firmware V6 unlock OK, but makes strange behaviour of key, itself sending signal every few seconds.
written firmware for 4g0959754K then all OK
Last edited by HeXeN; 10th May, 2019 at 10:46 AM.
Mitsubishi outlander/asx pcf7952
- original pcb 315mhz OK
- china pcb FAIL "chip error"
Nissan 5-button Hitag AES
a2c32800800
144308 FAIL
144310 FAIL
Last edited by HeXeN; 28th February, 2019 at 11:06 PM.
I have an e90 China key blocked. Can I renew it?
Trimis de pe al meu SM-G935F folosind Tapatalk
Havent tried china with kd-x2.
But I only unlocked china with dump from cas2/3 with vvdi2.
How? I have even vvdi prog.
Trimis de pe al meu SM-G935F folosind Tapatalk
fiat croma ok
alfa 159 ok
did not test keys on car
RENAULT PCF7961 FAILED
Please report to kd engineer if you can find one. Tell them they cloned barracuda bad.
Land Rover Freelander 2 OK.
HeXeN (6th March, 2019)
Volvo 6button 868MHz success
Last update has changed something because today I could unlock china pcb mitsubishi outlander pcf7952 433mhz & 315mhz version (from post #2)
No renew option for Citroen Xsara and C5 remotes .
Sharaf
Last edited by mahmoud10th; 10th March, 2019 at 11:59 PM.
It's thread about remote renew feedback only.
mahmoud10th (10th March, 2019), super jumbe (16th May, 2019)
Bookmarks