Peugeot 107 VA2 key bit

[lion0304]

Hi, could someone confirm this bitting code: 653116

[rapidlocksmiths]

i dont see bitting 653116 on this picture .

you can enter a number of different codes which will all cut the same key ,

top track looks like : 856855
bottom track look like : 143144

so you could enter in machine ;

143144
856855
843844
HQ3HQQ

and so on , theres around 40 different codes that will cut the same key but i dont see same cuts as you

[lion0304]

You're an expert in bitting and decode, i'm jsut start learning. You use card 1234Q5678H for this VA2?

[rapidlocksmiths]

yes its 1234Q5678H series , card 1125 or 1126 i believe

[rob h]

107 - VA2.jpgMake sure to use a 2mm cutter!
card 1126
If you have a good look at the key, you see the spot, where the shim rests.

a:8--8--
b:-42-44


a:8--8-5
b:-42-4-

[p1et]

I cut on Viper with 2.5mm cutter and all good.

[lion0304]

107 - VA2.jpgMake sure to use a 2mm cutter!
card 1126
If you have a good look at the key, you see the spot, where the shim rests.

a:8--8--
b:-42-44


a:8--8-5
b:-42-4-

Yes i see al the track. From middle :

To Up: 5-6-7-8

To Down: 4-3-2-1.

My machien is on the way, now still training to use Instacode and decode by eyes before practice.

Thanks you so much.

[rob h]

I cut on Viper with 2.5mm cutter and all good.

Only if coded correct, you can use 2.5.
By using the va6 decoder, you can find out, which side of the track is touched by the shims.

[ihlocky]

Sorry to bump the thread I have Va2t related question also.. today I did lost keys on a Peugeot 107 year 2006 or so a friend at dealer was kind enough to supply key code the code was as follows c3u5q this I put into instacode and couldn't get bitting.. eventually stripped lock and got bitting of 558658 this key I cut and it worked fine.. when I put bittings into instacode I get a code of 856855..my question is how does dealer code translate into bittings I'm totally stumped.. Kind regards Irvine

[Manta1600]

Sorry to bump the thread I have Va2t related question also.. today I did lost keys on a Peugeot 107 year 2006 or so a friend at dealer was kind enough to supply key code the code was as follows c3u5q this I put into instacode and couldn't get bitting.. eventually stripped lock and got bitting of 558658 this key I cut and it worked fine.. when I put bittings into instacode I get a code of 856855..my question is how does dealer code translate into bittings I'm totally stumped.. Kind regards Irvine

This look like pin code for key programming (one digit must be removed) not for key cutting

[ihlocky]

It's a Toyota system no pin required

[lion0304]

Sorry to bump the thread I have Va2t related question also.. today I did lost keys on a Peugeot 107 year 2006 or so a friend at dealer was kind enough to supply key code the code was as follows c3u5q this I put into instacode and couldn't get bitting.. eventually stripped lock and got bitting of 558658 this key I cut and it worked fine.. when I put bittings into instacode I get a code of 856855..my question is how does dealer code translate into bittings I'm totally stumped.. Kind regards Irvine

In your case AKL, lishi 4 lifters is your best friend.

5mn and you get the right cutting code