Ford Focus 2005 synchro problem

[vopi]

Hi, please help me with my problem.
I have Ford Focus 2005 with 1.6TDCI engine and in engine ECU I have DTC with incorrect synchro. I tried to init all and without success. I tried to learn keys again but still have problem with outcode. I stil get for example 0044 E5FA94 FFFFFF. the last part with FFFFFF is wrong and I cant to calculate correct incode. where is the problem???

I red dash 9S12H128 with mask 1K78X and eeprom from engine ECU EDC16C34. is it possible to make synchro manualy in dumps? Why is outcode with FFFFFF?

thanks for help

[esxo]

Test an report....
Pass in PM.

[okura]

because ecu is damage, if damage out code is every 000000 or FFFFFF, I can make synchro or repair ecu

[vopi]

Test an report....
Pass in PM.

thanks for help but probem is the same.
When I put ECU back immo light fast blinking and I thought that is fine. Outcode was OK and incode was accepted by ECU. I learned two keys withou problem but when I set inicialization ECU in IDS everything was the same - outcode contain FFFFFF and all was wrong.
Any idea to solve the problem - I thing problem must be in engine ECU.

[okura]

I can make synchro, if you need