ultraprog
Hello,
Im curently trying to get back in the industry after many years off pause. Because of circumstations i have lost all the tools and data base I have before...but it would be outdated by these time anyway. Many new tools in the market and is hard to make a decision.
I'm Intrested to get tools and sw for SRS data crash removal so I can cover as much as posible. Any recomandations are welcome
tools/sw/trusted supliers.
Best Regards
If It helps you try push the: Thanks and REP
I do the same each time it helps.
ultraprog
“There's nothing more dangerous than someone who wants to make the world a better place.” ― Banksy
SadCriss (17th March, 2019)
Ultraprog will definetly be a go for tool.
Any opinions between CarProTool and Ultraprog?
Any opinions betwen Orange5 and VVDI? Should I get both or just one or the other?
Last edited by SadCriss; 24th March, 2019 at 05:49 PM.
If It helps you try push the: Thanks and REP
I do the same each time it helps.
Better both ... and direct newest software brain.exe 2019 :-) and don't be so sad Criss ...
You use srs units files at your own risk. I am not responsible for any damages. Don't ask about passes, one file=one pass.
If I helped, please, use magic buttons reputation+thanks.
Best regards.
Dragon
carprotool works well itself. I just purchased the can adapter from them but it failed me on toyota srs 2018. Only ID chip but never read. Tech support was helpful for a little bit then very disrespectful. I cannot recommend them for this reason to be honest. No business should disrespect customer after spending 500 euros for one activation and tool to make job faster. Never asked for tech support before and did many jobs with this thing. Trying to save time costed me 2-3 hours of extra work trying different cable power supply , waiting for tech support etc. In the end I did it the old way on board with no issues.
I recommend carprog to start support is always good.
Last edited by driiven; 24th March, 2019 at 10:42 PM.
SadCriss (24th March, 2019)
"buy all the programmers"
1's never enough and you never stop buying
“There's nothing more dangerous than someone who wants to make the world a better place.” ― Banksy
kosta89 (28th July, 2019)
dragon100 (26th March, 2019)
Thanks for the advice!!!
Yes support is very important and more important when situation is pressing you...
I check CarProtool for full airbag package it is 2700 euro.... so not cheap at all... and for that amount off money customer would expect some decent to very good support.
If It helps you try push the: Thanks and REP
I do the same each time it helps.
CarProg, Ultraprog, XPROG, UPA - It would be ok for start
SadCriss (26th March, 2019)
I didn't buy the all activations but stilll $1000 plus and only one other instance when I needed tech support for 1st day. They send power supply with shitty adapter for usa 110v so it came out. I work on a bench with power plugs underneath so it came loose. On first day I wasnt familiar with device and was not getting any reading. On bench with power supply cable being short device was not getting 12v only usb power hence read failed. Then two weeks ago purchased CAN srs module and more activation for 500 euros. But CAN ADAPTER was JUNK. Only ID SRS model but never read always FAIL. support ask me why I buy tool if I am not smart enough to do job? Who can ~~~~ up plugging some 3-4 cables 12v gnd can hi can low to srs module in this business???? I did with onboard in a few minutes no issues but to be faster always better. Only their module for faster is a BULLSHIT
I would like to Thank You all for the suport!!!!
I have made most off my decisions on buying some tools. Not all but a big part and promisse if things go well ill get them all
I have one last question any recomandation for Airbag Tools that work good on North American market?Most of the tools work good on European and Asian vehicles...
Thank You!!!!
If It helps you try push the: Thanks and REP
I do the same each time it helps.
Bookmarks