What kind of tester you have?
Hello again, after clone the ECU an Astra 1.6 16v z16xe. There are electrical problems.
electrical fault light is lit.
the scanner gives these failures: P1481- relay fan
P1482- " "
P1483- " "
P0530- A/C Refrigerant Pressure sensor circuit.
the failure leaves no delete them.
The problem is that no function the two speeds,
But if it works when it reaches the temperature of 95* degrees Celsius
We checked all the connections and cables and all is well,the relays are good and fuses.
Also install the old ECU and will not give bug electric. all ok
It seems that this hard thing.
Sorry for my English.
Last edited by Nak0r; 23rd March, 2019 at 10:00 PM.
What kind of tester you have?
Nobody knows anything ?
Mate use another ecu. That one is busted )
You can set the electro fans or A/C with opcom ?
Have you got tester which you can use to drive the fans?
Yes,you can change config with opcom.if that doesen't fix the problem copy flash from orig ecu,because early model of z16xe has an engine cooling module and later one drive the relay directly withot that module.
exact final that would be missing by check. The problem that nose to do so and can not find any tutorial on the internet.
If someone can give me a cable would be very grateful.
what I would do with opcom. I guess that with with any version of opcom It can be done.
Last edited by Nak0r; 25th March, 2019 at 03:27 PM.
Do you have internet/teamviewer possibility in that pc which you have op-com?
I am sorry, I can not.
Bookmarks