programator V850 NEC RCD310 RCD510

**yahia1908** · 31st March, 2019, 11:25 PM

rcd310+rcd510

pinout

TX
RX
FLMOD TO 5V
RESET TO GND 1S time

**marek527** · 7th April, 2019, 07:29 PM

friends where you can buy a programmer

**bandus** · 23rd April, 2019, 09:08 PM

Dear friend yahia198, I greatly appreciate your contribution to the experience and the knowledge.
Best regards. Bandus.

**simplus** · 29th April, 2019, 10:20 AM

Hi
Has anyone tried recording FLASH NEC this program?
I checked read only. Reads great.
Thanks yahia1908!

**bello1** · 26th May, 2019, 01:42 PM

Excellent!
That's working with Win 8.1 via RS232.

Can I write dump from other RCD310 with known code??
Is anyone tested this?

**mikemike** · 3rd June, 2019, 11:48 AM

Hi!Thanks,i tested,with xp... 3358 read works,3353 not works(init fail...).

**yahia1908** · 3rd June, 2019, 07:26 PM

with xp works

Envoyé de mon SM-A310F en utilisant Tapatalk

**mbi** · 3rd June, 2019, 08:55 PM

Originally Posted by mikemike

Hi!Thanks,i tested,with xp... 3358 read works,3353 not works(init fail...).

What radio have you tried? Was it Bosch RCD310 with d70f3353?

Originally Posted by bello1

Can I write dump from other RCD310 with known code??
Is anyone tested this?

Yes, you can change code and write flash, tested on Blaupunkt RCD310.

Little bit more info how to use it here: https://www.youtube.com/watch?v=odxcF2s_sSc

Yahia1908, could you put this video to 1st post, please.

**mikemike** · 3rd June, 2019, 09:20 PM

Yes,blaupunkt 7 640 211 360 1k0 035 186an, RCD310 with d70f3353.

**mbi** · 7th June, 2019, 09:56 PM

Originally Posted by mikemike;

i!Thanks,i tested,with xp... 3358 read works,3353 not works(init fail...).

Originally Posted by mikemike;

Yes,blaupunkt 7 640 211 360 1k0 035 186an, RCD310 with d70f3353.

I tested on Bosch RCD310, 5M0 035 186J, it's with 70f3353 and it works well.

**PGB89** · 26th September, 2019, 09:42 PM

Originally Posted by yahia1908

Attachment 607209programator V850 NEC D

70F3353, D70F3356, D70F3358

THANKS

Hello,

I would like to read NEC in RCD510 Bolero by RS232 but I do not how. Could someone send a schema like what yahia1908 sent? I know how connect RxD, TxD, GND and RST but I do not know what is PDX. Unfortunately, I cannot download this file, "V850_Prog RCD310 510.rar", which was shown by Yahia1908. Please help.

**mbi** · 27th September, 2019, 12:37 PM

Originally Posted by PGB89

I would like to read NEC in RCD510 Bolero by RS232 but I do not how. Could someone send a schema like what yahia1908 sent?

Are you sure there is no your board's picture in this thread? Post your pcb picture and someone help you maybe.

Originally Posted by PGB89

Unfortunately, I cannot download this file, "V850_Prog RCD310 510.rar", which was shown by Yahia1908. Please help.

Open my video and in description you'll find link to download. https://www.youtube.com/watch?v=odxcF2s_sSc
This is where this software was originally posted.

**XJTAG** · 14th October, 2019, 10:10 PM

[DEVIS = yahia1908; 3537678] RCD310

Envoyé par mon SM-A310F en utilisant Tapatalk [/ QUOTE]

thank you , this pins work for me on Win7 32bit with FTDI232RL<>RS232

i need code if one here can help me

thank you in advane

**shooting** · 14th October, 2019, 10:50 PM

Originally Posted by XJTAG

[DEVIS = yahia1908; 3537678] RCD310

Envoyé par mon SM-A310F en utilisant Tapatalk [/ QUOTE]

thank you , this pins work for me on Win7 32bit with FTDI232RL<>RS232

i need code if one here can help me

thank you in advane

You need dump from eeprom too for code

wbr

**XJTAG** · 14th October, 2019, 11:54 PM

[QUOTE = shooting; 3694999] Vous avez aussi besoin du dump d'eprom pour le code

wbr [/ QUOTE]

thank you tournage

I lost the dump of eeprm, if I can use another dump (D70F3353 + 95128) of another RCD310? if so, which one here can help me for these dump

BOSCH SEAT RCD310 PQ36 GP BVX
815 7 641 238 366 / 5P0 035 186 B
SEZ1Z3M5058417

thank you