here is your clear file
pass in PM
waiting for your result
2016 V40 P314295910 CPT airbag can clear I get 2 error codes
B11A013 left side restraints pressor sensor. circuit open
B11A013 right side restraints pressor sensor. circuit open
i have tried tachosoft clear i get 30 error codes
i tried iprog and grom clear keep getting these last 2 codes
i tried another dump from here still not good/
What the hell is going on. i read and read many threads here with problems with this part number.
im not sure if its a dump problem or on the car. if it is the car where the hell do i find this sensor. its not the sensor above the seatbelt as this brings another code.
Help someone....... i will attach original crash and my clear. see if anyone can help me.
Failure is success, if we learn from it......Greetings from down under..... ( Australia )
here is your clear file
pass in PM
waiting for your result
We make A
Living by
What we get,
but we make a
life by
What we give.
-Winston Churchill
Rtronics (7th April, 2019)
NOT GOOD, here is a pic, 29 error codes and it wont clear.
i also noticed something, you cleared lines CA00-DC70. none of my programmers write in to these addresses
Failure is success, if we learn from it......Greetings from down under..... ( Australia )
talk2idris (7th April, 2019)
also i just checked your clear. it is exactly the same as tachosofts clear which i mentioned before with 30 error codes and scan tool cant clear any of them.
Failure is success, if we learn from it......Greetings from down under..... ( Australia )
talk2idris (7th April, 2019)
i checked and clear with different tool
We make A
Living by
What we get,
but we make a
life by
What we give.
-Winston Churchill
pressure sensors are usually in the front 2 doors
failing that you sure you didn't bend up any pins on ecu?
problems gotta be in the car
“There's nothing more dangerous than someone who wants to make the world a better place.” ― Banksy
megabits (7th April, 2019)
heres the thing, i have checked the wiring from the sensor in the door to the airbag ecu plug. i have even replaced the sensor from a donor car with the same part number. all pins on ecu are fine. can i use a working tested dump from another car ? im not sure what to do next.
Failure is success, if we learn from it......Greetings from down under..... ( Australia )
Bookmarks