which region is your car?
which region is your car?
I tried with out immo ecu car not start.
Hi mate try this cleared with otochek
regards
Immo box should be unplug...
Must use another eeprom number.
Good luck
IF MY POST WAS HELPFUL DON'T FORGET TO GIVE ME LIKE AND REPUTATION... THAT WILL KEEP US HELPING OTHER'S
Stelaras26 (22nd April, 2019)
Why you are ignoring my message. My solution work 100% immo off
For 4D and for smart key
Anyway good luck
IF MY POST WAS HELPFUL DON'T FORGET TO GIVE ME LIKE AND REPUTATION... THAT WILL KEEP US HELPING OTHER'S
Have you encountered this type of car? Maybe you need to find the pin of the EOM and cut it off. On many types of toyota you need to cut off the EOM pin
Hi,
With the Immo box connected as normal try the following procedure:
1) Insert the key in the ignition and turn to ON position. (do not try to start the engine)
2) On the OBDII port use a jumper wire and jump(bridge - short) terminals 4 and 13 for 45 minutes.
3) After 45 minutes turn ignition OFF and remove key.
4) Insert key and start car.
Let us know result.
B.R
Knowledge is to share... so if I have helped just press [Thank You + Rep.]...
Bookmarks