New Lishi VAC102

[nazz2]

Has anyone used this tool on a Renault kangoo? tried the tool on a lost key 2006 kangoo but no matter how hard i tried to increase the tension, no pin got set! , fearing of breaking the tool, i had to use other means to get the code and make a key, i tried the back door, same situation,any ideas? i forgot to try it on the fuel cap though.

[kleidaras]

Has anyone used this tool on a Renault kangoo? tried the tool on a lost key 2006 kangoo but no matter how hard i tried to increase the tension, no pin got set! , fearing of breaking the tool, i had to use other means to get the code and make a key, i tried the back door, same situation,any ideas? i forgot to try it on the fuel cap though.

You can't decode vac door lock. They have side bar.

Στάλθηκε από το ATU-L21 μου χρησιμοποιώντας Tapatalk

[nazz2]

Are you sure? so why did they make one? or is it for ignition or petrol tank? thanks pal.

[kronk92]

yes as kleidaras said, you can only use it for ignition or petrol tank

[doolittle]

Works on the ignition.
tested

[rapidlocksmiths]

the VAC102 pick and decoder as said above was developed for the ignition lock and the fuel cap , it will never pick the door lock due to the clutch unit and sidebar , you wont tension the wafers to pick them .

the good news is it is very quick and accurate on the ignition and on the fuel cap , ive done loads by picking both of these .

[nazz2]

Good to know, thanks all.

[rapidlocksmiths]

theres a few tools designed for just the ignition and the petrol cap , these include

VAC102
HU87
SX9 ( though sx9 will work on most berlingo doors and those models without side cuts in the door lock )
HU162 9 cut ignition tool as different format to the door