Sralex (12th July, 2023)
HI mates i really need help with volkaswagen Atlas 2018 , The car is not turning ignition on at all , but the smart fob key is locking and unlocking the car , and when i press the start and stop button i heard the fuel pump working for seconds and then it stops , but the ignition is turning on at all
I have scan it with a scan tool and i only have three trouble codes that i don't have any information about them ,
B116D4A LEFT REAR EXTERIOR DOOR HANDLE
B116E4A RIGHT REAR EXTERIOR DOOR HANDLE
B12FDF0 IMMOBILIZER TERMINAL RELEASE FAULTY OR IMPLAUSIBLE
i REALLY HOPE SOMEONE COULD HELP ME
THANKS IN ADVANCED
Sralex (12th July, 2023)
I would start with the B12FDFO. Start the easy stuff first, power and ground.
Did you solve this. Have the same problem. Audi a3 2019 sedan
I have this problem in VW Tiguan 2018 with MQB Kessy. I have DTC in access and start system for immobilizer. Did someone of you resolve your problem?
To Push Buttons,Thanks and Reputation is always best way to thanks!
have you fixed your following issue, I have the same car same problem. thank you. xxxxxxxxxxxxxxx
HI mates i really need help with volkaswagen Atlas 2018 , The car is not turning ignition on at all , but the smart fob key is locking and unlocking the car , and when i press the start and stop button i heard the fuel pump working for seconds and then it stops , but the ignition is turning on at all
I have scan it with a scan tool and i only have three trouble codes that i don't have any information about them ,
B116D4A LEFT REAR EXTERIOR DOOR HANDLE
B116E4A RIGHT REAR EXTERIOR DOOR HANDLE
B12FDF0 IMMOBILIZER TERMINAL RELEASE FAULTY OR IMPLAUSIBLE
i REALLY HOPE SOMEONE COULD HELP ME
THANKS IN ADVANCED
Last edited by gmb45; 19th June, 2023 at 04:24 PM. Reason: no addys !!!
Most probably the first two errors B116D4A and B116E4A are causing the immobilizer terminal release faulty because if the door handle are not working properly it will prevent the immobilizer from being released so you can check the wiring of the door handles id damaged repair or replace them then reset the immobilizer this should work
try and report please
Bookmarks