Vw ecu pin code 036 906 034 ED

[kiszka]

I read with VAG COM and this is the codes I have:

Monday,19,August,2019,22:55:59:00007
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 18.9.0.2 (x64)
Data version: 20180927 DS296.0
www.Ross-Tech.com

Workshop Code: 790 07456 050316

VIN: 9BWAB45U1ET134593 License Plate:
Mileage: 65130km-40469mi Repair Order:



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 5U-VW23 (5U - VW Novo Gol/Voyage/Saveiro (2013 >))
Scan: 01 02 03 09 10 15 17 25 30 56

VIN: 9BWAB45U1ET134593 Mileage: 65130km-40469miles
-------------------------------------------------------------------------------
Address 01: Engine (J623-CFZA) Labels: None
Part No SW: 032 906 034 P HW: 03C 907 445 E
Component: CFZA-MM9GV H01 7305
Revision: --H01--- Serial number: XXXXXXXXXXXXXX
Coding: 00000000000000000000
Shop #: WSC 00000 000 00000
VCID: 1B35616D1AA5C79220-804E

3 Faults Found:
005488 - Engine Start Blocked by Immobilizer
P1570 - 000 -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 1
Fault Frequency: 1
Reset counter: 125
Mileage: 65134 km
Time Indication: 0
Date: 2021.14.10
Time: 00:21:31

Freeze Frame:
Bin. Bits: 00000000
Load: 0.0 %
Lambda: 0.0 %
Speed: 4.0 km/h
Temperature: 15.0°C
Absolute Pres.: 731.5 mbar
RPM: 145 /min


005650 - Engine Control Module Incorrectly Coded
P1612 - 000 -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 2
Fault Frequency: 1
Reset counter: 125
Time Indication: 0

Freeze Frame:
Bin. Bits: 00000000
Load: 0.0 %
Lambda: 100.0 %
Speed: 0.0 km/h
Temperature: 13.0°C
Absolute Pres.: 734.4 mbar
RPM: 0 /min

beautifully cleaned ecu
what did you do to make it happen

[gelo1984]

Jejejeje, yes it´s beautiful but I want to work it!!!.., my car don´t turn on. It´s an ECU new, i bought from the volkswagen dealer

[brend]

Jejejeje, yes it´s beautiful but I want to work it!!!.., my car don´t turn on. It´s an ECU new, i bought from the volkswagen dealer

Full clon from ori to new ecu!.......biker.gif

[kiszka]

Jejejeje, yes it´s beautiful but I want to work it!!!.., my car don´t turn on. It´s an ECU new, i bought from the volkswagen dealer

if the old ecu is alive, read the coding yourself
encoding should do vcds
vcds immo 5 won't do
or you can find someone who has a device to do it
or VW service salon remains

[gelo1984]

I bought the car crashed and when I send to fix, the mechanic told me that the ECU was corrupted, the old ECU was open and it´s hasn´t the EEPROM, for that reason I have to bought a new one

[kiszka]

I bought the car crashed and when I send to fix, the mechanic told me that the ECU was corrupted, the old ECU was open and it´s hasn´t the EEPROM, for that reason I have to bought a new one

remains what I said above
ecu is 9GV

[gelo1984]

Thanks, I try to do that today and I told you what happened, I´l do that with VAG COM and I posted what I get, thanksa thanks thanks

[gelo1984]

Hi, I tried to read the old ECU but it´s not works, I tried a lot of times but it was not possible!, what can I do?

[kiszka]

Hi, I tried to read the old ECU but it´s not works, I tried a lot of times but it was not possible!, what can I do?

this ECU, you can't do it, they don't have good expensive equipment

[gelo1984]

And another way to codify my new ECU with the dash?, with the first method that I´m trying?, with the pin code match this ECU with the dash for turn on the car?