2001 VW Beetle immo off

**Hebbydee** · 22nd May, 2019, 10:57 AM

Hi Guys,
I keep getting Block protected come up on read Any ideas?
Reading B58085 as a 24C02 as everyone has recommended.
Thanks

**Hebbydee** · 22nd May, 2019, 10:58 AM

Well Block Protect:0000H--03FFH to be exact

**brend** · 22nd May, 2019, 11:20 AM

Why is it so complicated!...............

Desolder/read and if need help load !
If yours programmer not read this,check pins!

It's standart eeprom and it's without same protection.

Originally Posted by Hebbydee

Well Block Protect:0000H--03FFH to be exact

**Hebbydee** · 22nd May, 2019, 11:38 AM

Thanks

Yes do not know why so difficult for a straight forward job. Connections seem all fine and Batronix normally works well. I even tried it on an old Wellon which is where I get the Block protected bit but both read same blank.
attempt read Beetle immo.jpg

**brend** · 22nd May, 2019, 12:18 PM

Pin connection 100% or wrong set type in programmer!

**Hebbydee** · 22nd May, 2019, 12:49 PM

Any idea of what set type you would use for this going by the other forum threads need to use 24C02 I am all out of ideas checked connections, 20190522_213541.jpg

**Lambda1** · 22nd May, 2019, 01:36 PM

Ecunumber? i think you read wrong eeprom + bad soldering job bro

**Hebbydee** · 22nd May, 2019, 03:04 PM

20190522_231747.jpg 20190522_235616.jpg
Tried reading the Fairchild chip too but same blank read. I assume has to be set type I really don't know. I just read C63 eeprom fine using same adapter.
And that is factory solder job before removed chip. I hate to see what you think of it when it goes back on

**brend** · 22nd May, 2019, 04:39 PM

Working with these banal chips is easy?
If you can't handle this simple job then
there is nothing to advise here!..............

Throw this idea out of your head and get somewhere to wash dishes.
There is certainly simple!

Originally Posted by Hebbydee

20190522_231747.jpg 20190522_235616.jpg
Tried reading the Fairchild chip too but same blank read. I assume has to be set type I really don't know. I just read C63 eeprom fine using same adapter.
And that is factory solder job before removed chip. I hate to see what you think of it when it goes back on

**Hebbydee** · 22nd May, 2019, 10:43 PM

Ok Brend thanks for the help mate you are a real inspiration.
I can see why in the last 11 years of doing this I didn't bother posting anything. Such a positive crowd.

**Hebbydee** · 23rd May, 2019, 04:24 AM

On a positive note I managed to finally get a read out of the bloody thing.

Here is the dump if anyone is still happy to help me for IMMO off.

Thanks

**Lambda1** · 23rd May, 2019, 10:57 AM

here you go.
magic buttons

**Hebbydee** · 23rd May, 2019, 12:21 PM

Thanks Lambda1 I will download it once I am able.
Any ideas as to why I keep getting sent to the login page when I go to download your file saying I am not logged in?
I manage to download any other file in other threads.

**brend** · 23rd May, 2019, 12:36 PM

Originally Posted by Hebbydee

Ok Brend thanks for the help mate you are a real inspiration.
I can see why in the last 11 years of doing this I didn't bother posting anything. Such a positive crowd.

You instead of hysterics to roll up and arise, it would be better to listen to what experts tell you here.
And here mostly work with dumps, this means that to communicate you must know how to use the programmer.
Here nobody will teach you this ,especially with such banality!

Your whining won't get you anywhere!

**Lambda1** · 23rd May, 2019, 12:43 PM

Thanks Lambda1 I will download it once I am able.
Any ideas as to why I keep getting sent to the login page when I go to download your file saying I am not logged in?
I manage to download any other file in other threads.

Not enough helpfull posts, not enough recommendations...
Download here:.xup.in/dl,18697336/beetle_read_fairchild_24C02.bin/
PW:digitalkaos