If I helped you - please press Thanks and REP.
72 61 69 73 65 20 74 68 65 20 72 61 74 69 6E 67 20 69 66 20 68 65 6C 70 65 64
I will help with all I can. Open for help 24/7 (Find software, dump, kick in the right direction)
TECHSIX.NET - PLEASE BE CAREFUL THIS SCAMMER !!!!
Hi, thank you for your respond.
I read on table with Infineon software by Carprog.
I also read it with a newer version of Carprog software.
Attached file.
cleared tested file
Last edited by Sapuhin; 22nd May, 2019 at 02:24 PM.
If I helped you - please press Thanks and REP.
72 61 69 73 65 20 74 68 65 20 72 61 74 69 6E 67 20 69 66 20 68 65 6C 70 65 64
I will help with all I can. Open for help 24/7 (Find software, dump, kick in the right direction)
TECHSIX.NET - PLEASE BE CAREFUL THIS SCAMMER !!!!
cesarjaramillo (22nd May, 2019)
THANK YOU FOR YOUR HELP.
IŽLL TEST IT TODAY AND GIVE YOU FEEDBACK.
B.R.
Hi, file don't work.
Still DTC B1193 Crash event storage full and locked.
Do you have a other file ?
Regards.
this will work,, pass in pm
If i helped you please press thanx
cesarjaramillo (22nd May, 2019)
Hi, Still DTC B1193.
I erase DTC, wait 10 sec, erase again and nothing.
I'll remove the module and programming on table.
Let you know if it works.
Regards.
cesarjaramillo (24th May, 2019)
Last edited by Sapuhin; 23rd May, 2019 at 10:00 AM.
If I helped you - please press Thanks and REP.
72 61 69 73 65 20 74 68 65 20 72 61 74 69 6E 67 20 69 66 20 68 65 6C 70 65 64
I will help with all I can. Open for help 24/7 (Find software, dump, kick in the right direction)
TECHSIX.NET - PLEASE BE CAREFUL THIS SCAMMER !!!!
cesarjaramillo (24th May, 2019)
If I helped you - please press Thanks and REP.
72 61 69 73 65 20 74 68 65 20 72 61 74 69 6E 67 20 69 66 20 68 65 6C 70 65 64
I will help with all I can. Open for help 24/7 (Find software, dump, kick in the right direction)
TECHSIX.NET - PLEASE BE CAREFUL THIS SCAMMER !!!!
need clear crash pleaseDR33-14B321-AC.rar
Bookmarks