Hi,
Is this possible....any help will be very much appreciated.
Best regards
Nezocas
Hi,
This ECU came to me with bad PLCC32 solder work made by ECU noob
After I replaced both adapters, car is running normally....( not sure if this are the original files)
Opel Frontera
2.2 DTI from 1999
with A/C
Now custumer wants more horse power.
Please add 20 to 30% more power,...... and EGR off from this files
File named AM29F010B original com corrector is the eeprom closer to the ECU corner (marked with a withe dot)
Last edited by nezocas; 11th June, 2019 at 03:48 PM.
X-Prog 5.60 / Upa-Usb 1.3 / CarProg 4.74 and 7.28 / MiniPro / Galletto 4 VD300 / Digiprog 3 / SVCI 2018 / Autel MP808 / Autocom 2020.23 / USBDM / Skyprog / RT809H / R270+
Hi,
Is this possible....any help will be very much appreciated.
Best regards
Nezocas
X-Prog 5.60 / Upa-Usb 1.3 / CarProg 4.74 and 7.28 / MiniPro / Galletto 4 VD300 / Digiprog 3 / SVCI 2018 / Autel MP808 / Autocom 2020.23 / USBDM / Skyprog / RT809H / R270+
Hi,
Problem solved.
Car was send to an ECU tunning shop.
Best regards
Nezocas
X-Prog 5.60 / Upa-Usb 1.3 / CarProg 4.74 and 7.28 / MiniPro / Galletto 4 VD300 / Digiprog 3 / SVCI 2018 / Autel MP808 / Autocom 2020.23 / USBDM / Skyprog / RT809H / R270+
Bookmarks