First you can post your original VIN
Second post full CEM dump
Someone was here . Car starts, but everywhere are config DTC stored. VIN, body style, year, and engine type stored in CEM doesn't match. I dont know which MCU stores config, (right one stored keys and synchro, left- no idea) . What options do i have?
1) buy volvo access and update CEM, but i'm affraid it will check update for VIN stored in CEM?
2) try to find similar car dumps, and make keys and synchro?
4) .... dont know
First you can post your original VIN
Second post full CEM dump
full you mean flash and eep from both MCU's?
Hey, Id try by changing VIN in the flash data of the 9S12 1K79X at $3BC0B onwards and then do a CEM reload online with Volvo. Dont know if changing the VIN will have a checksum error..... sorry i cant be more help
I have done such trick before and did not work, even though the changed vin in the cem was called up by vida, but along the line when I try to purchase cem reload, the system performed checks and came back with error that hardware does not much or part number does not match
Ok, I'll upload files Monday. I think something was replaced (some kind of "set" like CEm with ECU and keys?)
Because car has clogged roof window drainage pipes and huge water problem inside.
how the duck solve it??
I see 0L85D have bad reading.
Do you have problems with ICM, AUD, Remote Keys and etc , all work?
liulius (9th January, 2020)
no, just bad config errors in SRS and ABS.
solution, try it
...
Last edited by kaponne; 2nd July, 2019 at 08:47 PM.
bobbik (18th July, 2019)
@kaponne , how to register used AUD module (amplifier in the trunk) to the MOST net? Or how to disable MOST protection?
Last edited by bobbik; 26th July, 2019 at 06:29 PM.
Engine, abs, srs and radio are in block 0x0F8100 of left mcu flash. Changing 1 byte from it will cause dead car or lock mcu. Maybe due to checksum error
Hit like and thanks if I've helped you!!
The mcu can be erased if locked due to bad sum. I haf same issue and solved by erasing chip.
Bookmarks