File looks good. maybe cluster has immo data.
why do you need to swap clusters?
Hi guys
Wonder if anyone can explain to me why after replacing the cluster with one from another van, it cranks but doesn't start? I know some of you would suggest to copy eeprom from old to new, but the thing is that I suspect the eeprom dump is corrupted, so this is not an option. I want to add that the van has a petrol-gas engine if it's important. Original eeprom 24c16 dump attached.
Thanks in advance
File looks good. maybe cluster has immo data.
why do you need to swap clusters?
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ONLINE CAR FILE EDITION SERVICE
SERVICIOS DE EDICION DE ARCHIVOS AUTOMOTRICES
danngrigore (18th June, 2019)
I worked for a long time in an opel corsa. change a replacement dash and the vehicle would not start. I found out that the dash, conford module, key and ecu were all linked by the immo. So I got to buy all those extra parts. Possibly your dash is linked to immo. Please, if it is useful, click on thanks button.
regards
Last edited by spantor; 18th June, 2019 at 01:57 AM.
On riginal eeprom needles not working. Replaced with dump from similar cluster, needles work but no start.
Hi
How you manage to slow the issue
Bookmarks