maps for tomtom (4 series)

[paddy12345]

:-)) we nearly there

Its third way to solve this problem
so missing the post code for UK
use navcore u already downloaded NAVCORE_8.391_TRUCK_SE_GO_910
use map for truck 840.xxx
meta (make sure in side the meta file is this name Europe_TRUCK_2GB_840_2554)
crack them like evrey map
run
download this folder with post codes

 http://rapidshare.com/files/368527919/post_codes_840.rar

unrar dat
folder ''zip'' put on device, beside map folder (don't change zip name)
let me know

if still not we'll try other way;]

P S old navcore will NOT work with new map, that's way u couldn't run them

[guinness]

Hi Paddy

Thanks for the reply
I have put back on sat nav
NAVCORE_8.391_TRUCK_SE_GO_910

TTUnited_Kingdom_and_Republic_of_Ireland_840_2666
Speed cams / Meta etc.... and cracked with Albert_s_Easy_Activator
I have added postal zip and all working fine.




I have a brand new navcor /map/6 digit post code.




I have downloaded and opened the map of Europe for Truck.

Europe_TRUCK_2GB_840_2554.

This was too big for sat nav so i bought a 4 gig sd card to put it onto.

The map / Speed cams / Meta etc.... and cracked with Albert_s_Easy_Activator all ?OK?

but when i try to switch maps I chose "Europe_TRUCK-109" and it comes up with the message

?Problem with map - you cannot use this map on this device: Europe_TRUCK-109?

It still allows me to use the 840_2666 map

SO CLOSE NOW - SO SO CLOSE!!!!!!!

[paddy12345]

Hi Paddy

Thanks for the reply
I have put back on sat nav
NAVCORE_8.391_TRUCK_SE_GO_910

TTUnited_Kingdom_and_Republic_of_Ireland_840_2666
Speed cams / Meta etc.... and cracked with Albert_s_Easy_Activator
I have added postal zip and all working fine.




I have a brand new navcor /map/6 digit post code.




I have downloaded and opened the map of Europe for Truck.

Europe_TRUCK_2GB_840_2554.

This was too big for sat nav so i bought a 4 gig sd card to put it onto.

The map / Speed cams / Meta etc.... and cracked with Albert_s_Easy_Activator all “OK”

but when i try to switch maps I chose "Europe_TRUCK-109" and it comes up with the message

“Problem with map - you cannot use this map on this device: Europe_TRUCK-109”

It still allows me to use the 840_2666 map

SO CLOSE NOW - SO SO CLOSE!!!!!!!

hmmmm... bit confused

1. map, !NAVCORE!, meta, speedcams, post codes everything should be on memory card
2 turn off/turn on, should be there 2 new files *.bif *.bak
3 in some devices memory cards bigger then 2GB won't work, needed some modification of couple file so if u not sure, fit any small map on 4GB (map navcroe meta-crack them)and run, if ok that's great.
4 if still no joy grab bottle of cold beer
5 downlaod this

 http://rapidshare.com/files/368932617/SE_ttsystem.8.393.1911.rar

- folder Outsourced and file ttsystem throw on memory card
- make new text file name it -version- (version.txt)
- open it and put this
A:7903
B:9183
- make new text file and name it -model- (model.txt)
-open and put there
x40
-crack map and tt_system using map actovator

[guinness]

[QUOTE=paddy12345;519383]hmmmm... bit confused

1. map, !NAVCORE!, meta, speedcams, post codes everything should be on memory card
2 turn off/turn on, should be there 2 new files *.bif *.bak
3 in some devices memory cards bigger then 2GB won't work, needed some modification of couple file so if u not sure, fit any small map on 4GB (map navcroe meta-crack them)and run, if ok that's great.
4 if still no joy grab bottle of cold beer

Hi mate
deleted and formated internal / sd card
followed instructions 1/2/3/& most definetly 4

sat nav working and can see and use Europe truck map...BUT...

(dont know why there is always a BUT...)

the but is it can use the map but it says that there is no truck data in map so it will route me as a car?


the main thing is it seeing the map and using it.

b.t.w.
everything is loaded onto card and nothing on internal memory appart from a file called "internal.dat" - this file is made by the sat nav itself for some reason.

haven't tried your instructions 5 yet till i here from you

many thank
Mick

[denzzer]

Hi could someone help and tell which navcore I should use on my go910 I used a truck one but that's not much good to me without bieng able to use the complete postcode.

Cheers Denzzer

[bigfella]

Hi could someone help and tell which navcore I should use on my go910 I used a truck one but that's not much good to me without bieng able to use the complete postcode.

Cheers Denzzer

mate if u look in the downloads section on this site there s a zip file ,u need to download it and extract to ur tomtom device and it shud allow you to use 6 digit postcodes on your device cracked to truck maps n navicore.....mate if u had took the time to read previous post s in this thread ..you would have seen the postcode problem already answered by paddy.....here s the file u download and extract to ur device..............http://rapidshare.com/files/36852791..._codes_840.rar

[denzzer]

sorry bigfella i should of looked more closely thx for the help and time works fine

Thanks again
Denzzer

[bigfella]

sorry bigfella i should of looked more closely thx for the help and time works fine

Thanks again
Denzzer

no probs i m just glad you got it sorted ,nice one

[guinness]

Hi mate
I have followed all your suggestions including number 5

Everything on the sd card – map and navcore / postcodes, working fine (been using it all week)

So I am back to my old problem of taking my 7.5 truck into banned areas instead of going around them

When I ask it to change from car to truck The system will allow me to input the vehicle data (weight/ height / width / etc...) but when I try to use the map it says the following.

“the current map does not contain truck attributes. Truck routing can therefore not be supported. Car routing will be applied.”

So before i buy another sat nav (for trucks) or the cheaper option (lowbridge.com will supply data to put into POI folder) but as i understand it, t is only an indication (not routing).

Do you have any other suggestions or thoughts i can try.

Many thanks for all the help so far.

Mick

[guinness]

hi mate i think i have cracked it - i have used a tool called TomTom Keygen 2010 4.1D - this has created the file tmeta.dct in the map file
i can see and use the map and it is also accepting the truck attributes
will let ya know how it gets on tomorrow out in the sticks

many thanks
mick

[mzakho]

thanks

pls iam new help me how can actv. turkya map or any other map

regards

[mzakho]

Good Man

PLS NEW V.TURKEY MAP 845.XXXWITH speedcams(Radars) +META

[guinness]

Good Man

PLS NEW V.TURKEY MAP 845.XXXWITH speedcams(Radars) +META

go through this thread and look at the maps - nav cores -speed cams - meta's
they are all here in this thread

look at the talks between me and paddy and you will see that any problems you could posibly get have all been answered by paddy in this thread.

download paddy's tuturial - he will take you through every step of what you need to do. follow it step by step and you cant go wrong

good luck

[mzakho]

THANKS

PLS ANYNOE CHECK THIS LINK ((NAVOCRES)) 2TIMES I DOWNLOD AND IS CORUPT FILE SEE IMAG

 
http://rapidshare.com/files/209187081/SE_Navcore.8.410.1218.rar

[guinness]

THANKS

PLS ANYNOE CHECK THIS LINK ((NAVOCRES)) 2TIMES I DOWNLOD AND IS CORUPT FILE SEE IMAG

 
http://rapidshare.com/files/209187081/SE_Navcore.8.410.1218.rar

Hi
I have just tried this link for you and i am also getting exactly the same as you!!!

i am no expert so hopefuly someone will be looking at this thread that is and will be able to help
sorry i cant but at least you know it is not something that you are doing.

you could have a look at the chart in this thread and see if there is another nav core you could use?
just a sugestion
good luck