renault clio 1.2 8v with ac

[rikardo1]

one more question it will need emulator?

thank you very much

now i have to make immoff?yes or no

[rafal]

as i wrote..............#11
and Louislesinge #15

[rikardo1]

now i have to make immoof yes or no?

[rafal]

now i have to make immoof yes or no?

.......................yes.......................

[Louislesinge]

Here is your off.
Thanks to all the DK team!
Greetings and good night guys,

[rikardo1]

Here is your off.
Thanks to all the DK team!
Greetings and good night guys,

thank you very much again for you job and send me the pass please

[Louislesinge]

Hi,
Pass should be in your P.Ms, isn't it?
Greetings,

[rikardo1]

Doesn`t work i cut pin 58 ligth of immo turn off but car don´t run
it can be orginal file

[rikardo1]

Here is your off.
Thanks to all the DK team!
Greetings and good night guys,

i program the flash and solder on ecu cut wire 58 immo ligth turn of but car doesn´t work it can be orginal file

[rikardo1]

i program the flash and solder on ecu cut wire 58 immo ligth turn of but car doesn´t work it can be orginal file

[rafal]

here off.....................pass pm

[rikardo1]

here off.....................pass pm

i don´t know if you can remember but you gave me orginal file because i unsolder on the ecu flash memory m29f200bb i keep and than i´ve lost flash memory and i have to buy new memory flash and i can´t not have access to the orginal file is problem can´t not post orginal file and you gave orginal and than lousine gave imoof i program new flash soder on ecu i cut wire 58 but imoo ligth turns off but the car doesn´t work
thankyou

[rafal]

solder and unsolder in this ecu is not good idea...........better to buy equipment - less troubles

[rikardo1]

solder and unsolder in this ecu is not good idea...........better to buy equipment - less troubles

what is best solution talking about equiment to program

[rafal]

k-tag..................