Hello,
Do you already have a solution?
I have the same problem here and don't know what to do.
Kind regards,
Maikel
hello @all
i have a problem to reading a bosch me7.3.1 from a alfa 147 2.0 16v t.s with my kwp2000 plus. In the document from the me7.3.1 is writing that before i beginn the process i must put the pin 20 from the conecctor A on ground that i did. Wehn im now starting the communication with my kwp2000 plus the ecu woud be found and the programm tells me that i must turn the ignition key on off wait for 2 minutes and then turn it on. After this process can i click on the read button to save the file. but evrytime wehn i click on the save button the ecu dont woud be found.
wehre is my missstep? or is it a problem with the interface?
can anybody help me please !!!!
p.s. sorry for my bad english im from switzerland
Last edited by bambula tuner; 25th December, 2009 at 02:55 PM.
Hello,
Do you already have a solution?
I have the same problem here and don't know what to do.
Kind regards,
Maikel
MEGAUPLOAD - The leading online storage and file delivery service
Hello, it is necessary to put the pin 20 of the connector A of l ecu has the mass but before reading you must pin out 20 of masse
Last edited by esse; 5th August, 2010 at 10:46 PM.
Bookmarks