Im608 going to be the top programmer

**Weasel3** · 26th January, 2022, 09:47 AM

Originally Posted by Antonio266

It's called TEG key reader, it's the same system of Alfa 159 and Brera, it's paired with BCM, so the keys are programmed in both modules and are precoded like all others FCA keys.
If you need a spare key clone the transponder and put it in a Foat Croma shell, otherwise TEG won't recognize it.
For the remote key you can't do it with Autel, at the moment only TMpro with TEG license can correctly precode the Remote, dismantling the TEG and reading Eeprom.

I experience precode standard 7936, when AKL. Trying to add key by OBD.
Did not recognize, key in the TEG module. Prepare with the VVDI2. Did not work.

You can read TEG module, and program key directly with TMpro. But difficult to remove module.
Or remove BSI, (also a little bit difficult). Read out info. Prepare key with TMpro.
Add by OBD. K518 with PIN. Then remote key OK. Programming OK. Confirmed.

If spare, it should have worked by OBD. According to their menu. K518.
But did not work, when trying.
Would not read the key, in the slot on the K518. Did not recognize. (OEM key). Then not possible to prepare key.

And also it was originally AKL. It would not solved it anyway.

But key are expensive, and these cars are old.
So not always worth the money, for the customer.

The only model, which is gone benefit from this is the Brera.
Which is probably, gone be a future classic collectors car.

Sports coupe 3.2 JTS- 4x4 - 260hp - V6 engine.
With an awesome sound, when pushing the pedal.

And also the Alfa Romeo Spider Cabrio. Built on the Brera chassi.

**Matronix** · 26th January, 2022, 12:32 PM

It's add key, but if it is for sure Autel cannot do it, the KS518 fails on it and Abrites/Avdi (official license) fails on it, i will pass since I don't have the TMPro license for this activated (my TMPro2 is sitting in a box and the software is not even installed). The keys I can get are OEM but customer comes from far... not a good idea to start experimenting too much while he is in the 'waiting room'

This is just what makes it a risk to do - Autel says it supports it and checking the function it looks like it's all there (reading immo data, making dealer key, programming it, etc). Would love to give it a try just for the sake of it but not on a car from a customer far off who wishes for 2 new keys and will be whining when it cannot be done, better to leave it alone then. Maybe sometimes if it's one closer to home or if I spot one at one of my cartrader customers.

**PABLOPOLAND** · 27th January, 2022, 09:06 PM

hi autel im508 renault AKL 4A card??

**metalik** · 1st February, 2022, 12:12 PM

Hello someone test autel on A6c7 akl, in menu show its posibble by obd?

Wysłane z mojego LYA-L29 przy użyciu Tapatalka

**KUCIN** · 1st February, 2022, 07:25 PM

I have trouble with Ducato 2013. New key magnetimarelli- Readed PIN, make dealer key and code new key. Car start but remote is silent. I try other Delphi PCB and situation looks similar but remote working with changed keys position (locking=unlocking trunk etc).
Original key working fine. New key sending 434MHz.
I dont have any idea what is wrong.

**Manta1600** · 1st February, 2022, 07:31 PM

Originally Posted by KUCIN

I have trouble with Ducato 2013. New key magnetimarelli- Readed PIN, make dealer key and code new key. Car start but remote is silent. I try other Delphi PCB and situation looks similar but remote working with changed keys position (locking=unlocking trunk etc).
Original key working fine. New key sending 434MHz.
I dont have any idea what is wrong.

Just must learn what key on what model to use

Usually big Vans use Marelli cars Delphi - small vans Delphi - some Alphas Marelli

I this case you must use Marelli

**KUCIN** · 1st February, 2022, 07:53 PM

Yes im using Marelli but remote TOTALY dont work. As i think precode (dealer key) is done ok but key isnt working.
Second try is the wrong as i know DELPHI) but that remote is "working".

**Weasel3** · 1st February, 2022, 08:42 PM

Originally Posted by KUCIN

Yes im using Marelli but remote TOTALY dont work. As i think precode (dealer key) is done ok but key isnt working.
Second try is the wrong as i know DELPHI) but that remote is "working".

I also have some deliveries, which does not work.
Either that, or the seller mixed the pcb's.
Deliver MM when ordering Delphi.
Key start car - remote don't work. But send frequency OK.
So not funny, when ordering quite many.

**Sergey77kld** · 2nd February, 2022, 09:07 AM

Originally Posted by Weasel3

I also have some deliveries, which does not work.
Either that, or the seller mixed the pcb's.
Deliver MM when ordering Delphi.
Key start car - remote don't work. But send frequency OK.
So not funny, when ordering quite many.

You can take a keydiy or xhorse key and make a copy of the remote through these devices. Works great.

**Leeetoyo** · 2nd February, 2022, 09:13 AM

Originally Posted by Sergey77kld

You can take a keydiy or xhorse key and make a copy of the remote through these devices. Works great.

Have had trouble with the transponder with copying remote and tp.

It will stop working after a few starts..

I found making dealer key is best method with correct key.