adroidwayne65, the ezs, have mcu 1 and mcu2, the mcu1, outside is clean, no have any files, but the mcu 2 inside from ezs, have some information, and post here. Could you help me.
Ok, the keys leave it to me, but the files have password to open, could help me about this?
juniorlucival (4th September, 2019)
thanks for help, but after write both mcu, the ezs stop comunication with scanner, and don't work.
OLD school mate ............... let me know if you solve
_______________ D3-oToprog _________________
ig : vanos_batam
Definitely check connections. I had one plugged back in nicely (or so I thought), car worked great. That night a cold snap pushed through and dropped the temp below freezing. Customer called to say the alarm is going off, etc. When I came back out, the push plug clip had just barely come undone due to the expansion/contraction of the temperature change. I still double checked all my programming work, but that was a big waste of time that day.
here your FBS is ok in this file , but this old EZS 202-210 are very sensiible to key line problem, in last case try to renew and write file on IR mode .
Bookmarks