VW Crafter edc17c54 speed limit

[gitko]

hi to all
can someone help me and remove speed limit on this crafter now is on 92 km/h

Can we do on 120km/h

thanks in advance

[teerak2uk]

Use vcds also check maybe aftermarket limiter install on throttle body or pedal

[gitko]

I check but can only set lower speed

[insomnia2009]

speed limiter off

[icezero2010]

hi to all
can someone help me and remove speed limit on this crafter now is on 92 km/h

Can we do on 120km/h

thanks in advance

c17cc set to 0

[gitko]

thanks to all but with this file car raise more then 130km\h.
I set also and several addresses down for max speed but without resultant and on address F9504

Without success only vmax is out not set

[icezero2010]

thanks to all but with this file car raise more then 130km\h.
I set also and several addresses down for max speed but without resultant and on address F9504

Without success only vmax is out not set

you can test

C1804,c1806,c1808 set to 12000 dezimal

and set c17cc set to 0

[gitko]

you can test

C1804,c1806,c1808 set to 12000 dezimal

and set c17cc set to 0

I set it this but without resultant

[chli1976]

Set C17F6 and C17F8 to you speed limit wish.
Please post result

Is it not possible to set speed limit with VCDS ?

[Pzolee]

Hello boys.
What 100% working solution crfter speed limit? oR MODIFY or Off

[furburger]

you can test

C1804,c1806,c1808 set to 12000 dezimal

and set c17cc set to 0

Attached from a CTKB 109ps

[icezero2010]

Attached from a CTKB 109ps

2c1354 to 0

[furburger]

2c1354 to 0

I tried that & it didn't work....hence why I posted here... I didn't road test it though... I just used cruise control stalk to set limit before driving.. & limit of 58mph still showed as maximum selectable speed ... on Sprinter you can use the Cruise Control stalk to test limiter removal job without having to road test..
I assumed its the same on Crafter ?

[icezero2010]

I tried that & it didn't work....hence why I posted here... I didn't road test it though... I just used cruise control stalk to set limit before driving.. & limit of 58mph still showed as maximum selectable speed ... on Sprinter you can use the Cruise Control stalk to test limiter removal job without having to road test..
I assumed its the same on Crafter ?

this is another think max speedlimiter on cruisecontrol its a seperate value .

the speedlimiter must be off

[furburger]

Ok..thanks , if i get another one in I'll road test it before declaring it a fail

Do you know what TROT version is used for that soft version / ecu?

Sent from my SM-G900F using Tapatalk