Kubota RED keys

[instakeys]

just been offered the job of cloning loads of RED keys for a national plant hire company. Apparently they get a Kubota tech to fly up from London to do them all red keys losts on these plant. £1000 a pop.


I suggested cloning the red keys before they go missing. the black key here is 4D so assuming red keys will be too.


Anyone seen transponder case blanks for this type key?
anyone had success in cloning red keys?
Pic of same type black key attached:

A53371C7-EFAA-4C74-B623-EC805BD3C945.jpg

Thank & rep for this who assist

[Recoder]

I had a plant hire company approach me in London for 15 spares buty they didnt get back to me .
But my investgations lead me to belive you can Add Keys with the red master like other systems and the Blanks were an easy cross reference from another manufacturer .
Bit Vauge but hope it helps a little .

[sleepyrz]

from what i remember the red keys are not used for anything but programming more keys

i dont think they even start the damn things

it is a literal programming key

then the user keys are added with the red key

if all lost ive seen the starter replaced matched with a set of keys\

[godfathertre]

This sistem can be bypassed
There is a video in your tube it takes less
Than 5 minutes doing so
Is ridiculous the price
The charge for red key and programming 1000 pounds
Two black keys this is not security
Is a good way to make money for kubota plus there are problems as sometimes the red key will not be recognised and won't be able to reprogram black keys.

[instakeys]

I had a plant hire company approach me in London for 15 spares buty they didnt get back to me .
But my investgations lead me to belive you can Add Keys with the red master like other systems and the Blanks were an easy cross reference from another manufacturer .
Bit Vauge but hope it helps a little .

Your absolutely right, easy add black keys with red key. All machines keys are same, generic part. Lost all black and red keys is a nightmare.

[instakeys]

from what i remember the red keys are not used for anything but programming more keys

i dont think they even start the damn things

it is a literal programming key

then the user keys are added with the red key

if all lost ive seen the starter replaced matched with a set of keys\

your also right, red keys don’t start them just a programmed black key. Not on excivators. Coded solenoids on fuel pump and hydraulics. Not easy to bypass.

[instakeys]

This sistem can be bypassed
There is a video in your tube it takes less
Than 5 minutes doing so
Is ridiculous the price
The charge for red key and programming 1000 pounds
Two black keys this is not security
Is a good way to make money for kubota plus there are problems as sometimes the red key will not be recognised and won't be able to reprogram black keys.

Not a a five minute job...
cant be bypassed by some guy off YouTube ?! Immobiliser cuts off fuel pump and hydraulics. Don’t post unless you know what your talking about.


UPDATE to original post. There’s no way to get blanks for these, so found another original solution: got some other Kubota black key and drilled the rivets out to remove the transponder. (2 half’s of key case are held together with that rivet) installed a 4D carbon cloning chip and cloning did the job by looks of it. Will see when the plant guys will test them out. Waiting to see if code rolls on red keys after use. I’ll report what I find.

[godfathertre]

i have done this job on a kubota and i know what i am taking about .

[Gumbo1976]

godfathetre wonder if you could help me out

[Phil74]

Take a look at this: https://ecu-repair.eu/brand/45-kubota
perhaps they can solve your problem..

[Extremetat2]

Hi I have got a Kubota Kx015-4 and I have lost my keys, no red or black keys, is anyone here able to help me to get new keys??

[Extremetat2]

Hi I have lost my red and black keys for my Kubota, do you have a solution?

[myteleco]

hello!

Im also trying to find the correct transponder, do you what type of transponder works on kubota u35? I think its 4d60 tx6f, but doesn't clone with red key. is it 40 or 80bits?

thanks in advanced