what year is it and do you only have the vcds? this will likely need a new dump putting in the module as it looks the the eeprom or flash is corrupt
Hi , Audi S4 with “differential system fault“, need detect where is the fault
I think it is very likely that the module software is damaged (with this DTC in AWD module: "0325 - Internal Control Module Memory Check Sum Error"
The other one that doubts me is the ABS (the soft or coding). VCDS don't recognize the labels - Labels: None.
I see HERE that same ABS HW: 8K0 907 379 AN but with other SW: 8K0 907 379 CA is detected as labels: 8K0-907-379-V1.clb
And HERE the same HW y SW - 8K0 907 379 AN is detected as Labels 8K0-907-379.clb (In VCDS Labels folder, I have only the two files: 8K0-907-379-V1.clb and 8K0-907-379-V2.clb
I have checked the connectors and connection to the module and all are OK (+12V [30 &15], GND, CAN-H and CAN-L with oscilloscope)
If I take another 2nd hand with same HW & SW numbers, does it have to be long coding or can direct mout without coding?
Any help is welcome!
Post the VCDS Log
Last edited by kvalentino; 11th September, 2019 at 08:50 PM.
what year is it and do you only have the vcds? this will likely need a new dump putting in the module as it looks the the eeprom or flash is corrupt
Bookmarks