Lucas DCU3R immo off

[AndreiRPG]

Hello , I have a Dacia 1304 pick-up 2005 with ECU Lucas DCU3R from renualt kanoo ,clio 2, fiat doblo, suzuki etc. The original ECU burned. I buy an ECU from dismantling and I need immo off
This ECU is FROM 11.03.2003 and original is 15.02.2005.
I remove only eeprom from ECU bought but car isn't start.
I bought a USB programmer CH341a and I tried to read eeprom but i dit not succed , I don't know how to put eeprom and what model of eeprom is , on him writes 25080NC ATMEL.
but I did not succeed

[systemlinux]

you just have to copy the data, make a complete reading with ktag.


Do not move components.

[AndreiRPG]

I understand , how i can overwrite?

[AndreiRPG]

expansive. I need a cheap solution. I bought usb programer ch341a balck edition and i don t now where i can put the eeprom for read .

[Autotecno2006]

Try to put eeprom from original ecu to the Donner ecu and see what happens !!!!!!!!!!!!!! OK

[AndreiRPG]

I don t have ecu original , i have exchanege it + te diferrence for a good ecu... , i need a cheap solution , with usb programer ch341a i think doesn't read eeprom or i didn't do it properly help me please

[AndreiRPG]

The ECU i bought was functional.

[sergei5005]

Hi friend. You can try this. Ecu file and immobox fili match.

[AndreiRPG]

This is my original file
eeprom is 25080 original.rar

[sergei5005]

You need change file in ECU ,cahnge file in IMMOBOX module and programming new transponder with pin code from DCU3R folder upload in post #8.

[AndreiRPG]

I don't understand you say, i need immo off on ecu , my key and UCH it's functionable , i need immo off in ecu because original ecu burned. , i try with immo killer in 2h

[danielif]

Hi. Make ECU for auto coding, change into 00 00 FF FF in EEPROM 95080 adres from 02 to 05 and 82 to 85, and put ECU in car.

[danielif]

expansive. I need a cheap solution. I bought usb programer ch341a balck edition and i don t now where i can put the eeprom for read .

Useful info:
https://www.digital-kaos.co.uk/forum...-95xxx-Eeproms

[AndreiRPG]

Thx , for info i will try tomorrow, i have seen some say that you cut pine 20. It s necesary?

[AndreiRPG]

i can use another eeprom file and i il change it?