Vespa 300cc HPE 2019 key lost help needed

[gueswhat]

hello friends
i have a vespa 300 newest hpe
FULLY lcd dash model 2019
ecu :CM291701 (32M4G1.F01)

i wanted to read this ecu but by pins like the old ecu but i can read this because this is the newest model
and my tool is not support this ecu
but i have done one earlly model hpe whit the same dash as 2018 model abs NOT LCD DASH but hpe this was also whit same new ecu
but i have find a solution for start them but
on this new model it dont work
so this one i most open up to see where mcu is DOES anyone already open this ecu or dig in it ?
does someone done this ecu already
thank u friends


i have upload some picture and also the old ecu to you to see what is change on this model ecu

[jaed]

If you can not solve this now another solution is to put a older gts 300 ecu. It will start only give abs error on dash.

[f2f2]

The Guzzidiag software connection MIU1 or Miu G3 mode the connection started ? need
USB-KKL FTDIchip adapter

[gueswhat]

If you can not solve this now another solution is to put a older gts 300 ecu. It will start only give abs error on dash.

this is only for the model with the new vespa dash like 2017 and 2018
but the new vespa hpe have lcd and that wont work and dash you will see ecu error
so need to make this orginal transponder do you have open them up ?

[gueswhat]

The Guzzidiag software connection MIU1 or Miu G3 mode the connection started ? need
USB-KKL FTDIchip adapter

this is a new model guzzidiag dont support this ecu

[f2f2]

this is a new model guzzidiag dont support this ecu

Show me the picture how long does it take in this 2 mode : MIU1/ MIU-G3
I know it's not on the list
If something happens I'll send you a program.

[bid178678]

Hello,
I got the same problem, do you find a solution ?

[scoobydoo9]

Anyone tried doing via diagnostic port? Or found any other way to read it?

[gueswhat]

i have fix it and make key on the unit this tread is done and made for help just contact
the pins are not like the old unit the pins have change after i have read al info and i see the logic of the key cost me alittle time but i did it
iam now bizzy for add more speed and tuning bikes with this unit

for help just hit the
thanks button and sent me a message(L)

[MACKIE]

i have fix it and make key on the unit this tread is done and made for help just contact
the pins are not like the old unit the pins have change after i have read al info and i see the logic of the key cost me alittle time but i did it
iam now bizzy for add more speed and tuning bikes with this unit

for help just hit the
thanks button and sent me a message(L)

Can you please ( if its not problem for you ) share where to dig in it and what transporder type is used ...

Regards
Mackie

[osakawes]

Hi, I’d like to know your solution for lost keys for Vespa Hpe models. I am also having trouble with the new models. I can already do the earlier ones with mui1and mui3 but cannot seem to access the Mui4.

[gueswhat]

Can you please ( if its not problem for you ) share where to dig in it and what transporder type is used ...

Regards
Mackie

hello
this model i read without open it up i read it by kline do
you have pinout ? i have it if you dont have it tel me i wil share it
its only read and done you are ready for make key or you need to send me a file
i will make my key code for you and you program it and bike wil start


i am now bissy whit the new model PGZ05 REV.E RISS3010 EFFI
THIS is the newest around now but only for the 125cc model

[anthnyo]

do you know the pinout please thanks

[krisutune]

Hi, could you help me with read ecu 32m4g1 from vespa gts300 2020year ? I lost all key and want to add new one. My genuine device don't support this kind of ecu. Whitch tool you use to read it ? or if you have pinout i try use protocol like in older ecu. thx

[dejanz]

Hi, did you succeded with the new model PGZ05 RISS? Do you know its pinout?
Thanks