Jaguar XF 2013 front BCM dump DX23-14B476-BG

**Paddjohn** · 10th January, 2021, 09:22 AM

Can you tell me what files are programmed to the vehicle because this has no vin numger in it (eeprom read after writing).

**Plowman** · 10th January, 2021, 10:06 AM

Ah sorry. Please ignore the files which mention 'after writing' as I was just testing. The other reads are what is currently in car. Using SDD, when I try to program keys/KVM,front BCM, or immobiliser function I get: 'failed to write target identifier'.

**Paddjohn** · 11th January, 2021, 10:26 AM

When programming BCM using SDD it needs to a virgin BCM. It won't program it if its got a vin number in it.

**Plowman** · 11th January, 2021, 10:59 AM

I have flashed the virgin file from this thread and tried, without success 😐

**topclef** · 11th January, 2021, 11:02 AM

'failed to write target identifier', means BCM faulty or corrupted , write virgin dumps P-flash + D-flash , configure it as new module using SDD , happen to me and i did it succefuly .

I forgot one thing , rear BCM and front BCM must have the last SW level , otherwise will not work

make update for rear BCM

Good luck

**Paddjohn** · 11th January, 2021, 11:12 AM

topclef is right, you need to write virgin dumps. Existing BCM eeprom and Existing BCM P Flash are not virgin dumps.

**Plowman** · 11th January, 2021, 11:14 AM

Thank you. I would be very grateful for virgin files for rear BCM and I haven’t got D flash data at all 👍

**Plowman** · 11th January, 2021, 11:17 AM

.... I was able to update the rear BCM no problem, so the reads I posted are latest sw.

**topclef** · 11th January, 2021, 11:39 AM

Originally Posted by Plowman

.... I was able to update the rear BCM no problem, so the reads I posted are latest sw.

in this case , write virgin front BCM dumps and reconfigure it as new , good battery and charger ...

**topclef** · 11th January, 2021, 11:55 AM

...............................................

**Plowman** · 15th January, 2021, 12:20 PM

Every time I try to update KVM or program keys I get this message. Is this normal?

**Plowman** · 28th January, 2021, 08:51 PM

Originally Posted by topclef

'failed to write target identifier', means BCM faulty or corrupted , write virgin dumps P-flash + D-flash , configure it as new module using SDD , happen to me and i did it succefuly .

I forgot one thing , rear BCM and front BCM must have the last SW level , otherwise will not work

make update for rear BCM

Good luck

Could you please forward virgin dumps (including D Flash)?

**Plowman** · 14th February, 2021, 03:52 PM

Originally Posted by topclef

'failed to write target identifier', means BCM faulty or corrupted , write virgin dumps P-flash + D-flash , configure it as new module using SDD , happen to me and i did it succefuly .

I forgot one thing , rear BCM and front BCM must have the last SW level , otherwise will not work

make update for rear BCM

Good luck

Could you please send virgin D Flash?

**metalik** · 4th May, 2021, 11:54 AM

Originally Posted by topclef

Hello ,
Jaguar XF250 , NO KEY DETECTED , common problem when disconnectin the Battery
how can check these files from BCM Jaguar XF if correct , can read only eep + P-flash ,can't read D-flash with VVDI-Prog , when i try to read D-flash message Partition D-flash 0 sector 0K , eeprom 8 Sector 2K Check error

thanks in advance

Hello i have a same problem in same car, its any way to restore a d-flash from eeprom or p-flash. I have d-flash from rfa module. Any sugegestion?

**topclef** · 5th May, 2021, 09:22 AM

Originally Posted by metalik

Hello i have a same problem in same car, its any way to restore a d-flash from eeprom or p-flash. I have d-flash from rfa module. Any sugegestion?

better , try to read front BCM D-Flash 32k , i can restore eeprom for you
if you cannot read it , use these files EEP+FLASH and reconfigure the BCM using SDD