KIA RIO 2013 US market Dashboar conversion

**Wiihuu** · 20th September, 2019, 07:05 PM

Hello everyone.

I have my KIA RIO 2013 manual tranny with the dashboard that missing temperature gauge. It's very sad. The dashboard code is
94022-1w014

I bought two another dashboards from cars with automatic tranny with the hope to recode them
94022-1w118
94032-1w018 <---supervision

All three dashboards have the same CPU NEC d70f34 + 24c16

The only one issue I've seen with *18 dashboard in my car the speedometer does not work.
I flashed 94022-1w118 with the code from 94022-1w014 and got my mileage and the speedometer back, but now the suggested gear is showed incorrectly - some nonsense symbols instead of numbers.

Does anybody have the dump from 94022-1w114 and/or 94032-1w014 or know what bit to modify to enable the AT dashboard *18 to work with MT car?

Many thanks in advance.

**jomberykaso** · 20th September, 2019, 07:19 PM

post a picture of your dash

**Wiihuu** · 20th September, 2019, 07:32 PM

Sure94022-1w014.jpg 94022-1w014.code.jpg 94022-1w118.jpg

**kuzmichh** · 20th September, 2019, 07:47 PM

Try this and report

**Wiihuu** · 21st September, 2019, 01:35 AM

Hi

The eeprom1.bin partially works but the speedometer showы 2 or 3 times faster speed. I can run 200 mph

**Wiihuu** · 21st September, 2019, 02:13 AM

Replaced 0x000 - 0x2c4 from 94022-1w014 on 94032-1w018 (supervision) and it works flawlessly!

One tab disappeared related to the service interval but I don't care.

I'm still looking for 94032-1w014 and 94022-1w114 dumps...

**kuzmichh** · 21st September, 2019, 08:29 AM

I did these dumps using parts from different instrument panels. If you reduce the area of changed data, you can find a line with an coding or a few bytes of codings.
eeprom1 - from 000 to 08F part 1W014, from 090 to 10F part 1W118, from 110 to 7FF part 1W014
eeprom2 - from 000 to 10F part 1W014, from 110 to 7FF part 1W118
I used a program to compare dumps: Fairdell HexCmp

**alba2** · 21st September, 2019, 09:23 AM

How to create a full dump ? i have a dashboard from a rio 2016 940331w870 cluster vision with the lcd that not work .
Tell me how to do i put a dump ....

**Wiihuu** · 21st September, 2019, 09:56 PM

Thanks!

I tried to keep only one part between FFFF and flash the dash but didn't find the part that is responsible for the speed coefficient

I deem the code is between every FFFF. My guess is that there is the piece for the general setting and there are pieces for every tab. I mean when I'm hitting "Trip" there is the portion for NEC to execute. I would like to find out the algorithm but need some hints...

**Wiihuu** · 21st September, 2019, 10:04 PM

Mine 94032-1w018 looks similar except it's for US market. I know there is somewhere the "bit" to switch it over to EU market and KMs. I found one guy who could modify the dump but for Hyundai Accent. He rejected to help even for $

**Wiihuu** · 21st September, 2019, 10:17 PM

Originally Posted by alba2

How to create a full dump ? i have a dashboard from a rio 2016 940331w870 cluster vision with the lcd that not work .
Tell me how to do i put a dump ....

I used CH341a with the clips to read/write 24c16

What exactly doesn't work?