Help identifying heat paste/silicone

[Limitlesstuning]

Hello everyone.

Anyone know what the white heat paste/silicone is called in the pic?

Ive seen it used on many ecu's to bond the pcb to the aluminium housing part of the ecu cover.
WhatsApp Image 2019-10-12 at 12.35.40 AM.jpg

[narkeleptk]

Its probably some in house mix for the ecu manufacturer. I usually just use thermal grease when replacing it. Like this https://tinyurl.com/y3g85tmz

[Limitlesstuning]

thanx for your reply, only problem is the thermal grease wont "glue" the pcb to the housing and thats my problem because there is about a 5mm gap between the pcb and the housing without the "glue"

[Meat-Head]

Confused, go to local computer shop, nothing new, heatsink GLUE beleive it does NOT come off again

https://www.amazon.com/MG-Chemicals-.../dp/B06XDL1NRQ

[narkeleptk]

thanx for your reply, only problem is the thermal grease wont "glue" the pcb to the housing and thats my problem because there is about a 5mm gap between the pcb and the housing without the "glue"

"Thermal adhesive" is what you would want to search for then but re you sure there is nothing else helping gold the pcb in place like some nylon spaces?