castin (18th October, 2019), kwat (6th December, 2022), narkeleptk (24th April, 2020), norishor (4th May, 2020), PocketHero (18th October, 2019), sleepyrz (19th October, 2019), smirnoff_rules (17th October, 2019), TERMINATOR1000 (17th October, 2019)
castin (18th October, 2019), kwat (6th December, 2022), narkeleptk (24th April, 2020), norishor (4th May, 2020), PocketHero (18th October, 2019), sleepyrz (19th October, 2019), smirnoff_rules (17th October, 2019), TERMINATOR1000 (17th October, 2019)
Yes, IT can.
Other question how they Will be made...
For Example VA2T: the machine cuts the key what turns in the lock, but you can't pull it out, because there are such sharp edges cut, that IT won't come out.
HU92 was cut more normal, but IT is far away from perfect.
An X6/V8 cuts better keys
TERMINATOR1000 (18th October, 2019)
Thanx for opinion man!!
Be polite. No Thanks + Rep, no HELP!!! Slava Ukcraine. Dead Putler civilians's killers!!!
Yeah I'm also interested in CGDI Godzilla as it seem's solid.
must agree dolphin machine really bad with va2 and va6 keys
Xhorse team known this for quite some time and never fixed
Ok. I would prefer Miracle A9 newest for the shop, and an x6 or Alpha for take with you. X6's only failure is the tailcut at Audis where it is needed for ignition switch. That's the only thing what it didn't made fine for me, I had to make it with a Dremel
As I said somewhere the Alpha is a good toy, with grapix display and so on.
The only thing why I bought the Dolphin was the good experience what I heard about it. And the fact, that IT can work perfectly from its own battery. (Neither Miracle or the X6 does that)
My experience shows me that you need át least 2 intelligent key cutters, one for the car, one for the shop. The third is only needed when something happens with one of the others - makes sense tó have a second (spare) one what can work from 12v too.
Weasel3 (18th October, 2019)
I've found a VA2T Example, tried with smoothening and so on, but the result is the same: very difficult tó pull out from the lockIMG_20191018_153248.jpg
2560172885 (25th June, 2020)
immoneard (30th April, 2020)
Yipp, was cut with Dolphin, approx 6 times
We tried to make some corrections on it, but As you see without success.
We tried to cut it As VA2T @ Renault & Citroen. Decoding looks a bit weird on the phone, but IT works in the lock As long you don't want to pull it out.
At least 4 key blades went to the brass collecting bin.
We cut a blade for an E46 between, decoding and cut without error msg, looks a bit different like the one what the Miracle made, but works. The HU92 is better, you can pull it out from the lock.
Have cut a HON66 too, but IT seemed tó be correct, just didn't had any lock for trying.
Yea...........
Sounds like a garbage machine with bugs from 7 years ago with new added bugs.......
Triton/ alpha from kukai killing it
Would love more info on cgdi godzilla and the 2m2 tank
The thanks button is HERE looks like this --->>> THANKS
p1et (19th October, 2019)
Bookmarks