Welcome friends.
I have a problem with throttle adaptation.
Does anyone have a wiring diagram from the engine controller to the throttle?
And does anyone have a PINOUT from the throttle (I want to check the voltage)
I have DTC P1564 and 1545
I have already replaced the throttles (I already had two others)
Motronic 7.5.10
Throttle 03C133062
Results 1 to 3 of 3
-
19th December, 2020, 12:53 PM #1DK Veteran
- Join Date
- Nov 2018
- Posts
- 932
- Thanks
- 463
- Thanks
- 388
- Thanked in
- 250 Posts
Caddy 2003 Motronic 7,5 1,4 Petrol
Last edited by Mooti; 19th December, 2020 at 12:56 PM.
-
4th January, 2021, 09:05 AM #2DK Veteran
- Join Date
- Nov 2018
- Posts
- 932
- Thanks
- 463
- Thanks
- 388
- Thanked in
- 250 Posts
So yes, I replaced the driver with a different one, still the same wires have a transition. they all have equal resistance of about 2.7 to 3.0 ohms.
I have already replaced the throttle with a 100% efficient one.
I replaced the battery with another one.
Now I have no ideas.
There is an error during adaptation due to errors.
Anyone have any idea?
-
4th January, 2021, 04:35 PM #3Top Poster +
- Join Date
- Jan 2019
- Posts
- 227
- Thanks
- 205
- Thanks
- 125
- Thanked in
- 78 Posts
give engine code plz ...
what DTC you have ??
does that caddy have EGR ??
with what tool you trying to do the throttle adaptation ??
"basic settings" - channel 60 ??
*in some types engine must be hot ...Last edited by Andreastech81; 4th January, 2021 at 04:41 PM.
Reply With Quote
Bookmarks