Dead Citroën Jumpy/ expert after pin read with FVDI

**razzyb** · 31st October, 2019, 01:04 PM

Hi I am looking for flash for Peugeot expert/Fiat scudo / Citroen Jumpy 2011 JCI flash 4401 . car is dead after pin read with FVDI. i am getting checksum error with current file. car is dead. any help much appreciated. Thanks<br>Functional plan no  9664058780<br>software ref   9601451680<br>manufacture 17/08/2008<br>flash type 4401

**rafal** · 31st October, 2019, 01:10 PM

why double thread??????????
https://www.digital-kaos.co.uk/forum...read-with-FVDI

read and post sw signature.............

**razzyb** · 31st October, 2019, 01:19 PM

i dont know if it correct one because i read it after the car is dead... signature 44.01 thanks for your help Rafal

sorry i may have posted twice by mistake

**rafal** · 31st October, 2019, 01:23 PM

today is your lucky day..........
here

**thayer201** · 31st October, 2019, 01:27 PM

Originally Posted by razzyb

i dont know if it correct one because i read it after the car is dead... signature 44.01 thanks for your help Rafal

sorry i may have posted twice by mistake

look here : https://www.digital-kaos.co.uk/forum...530&viewfull=1

post 30....

rafal beat me to it

**razzyb** · 31st October, 2019, 01:50 PM

Hi, Thayer201 i have tried post 30 file today. it has same checksum error as soon as i load it into FVDI. thanks for your response Sir

**razzyb** · 31st October, 2019, 01:51 PM

Thanks for the file

**rafal** · 31st October, 2019, 01:55 PM

Originally Posted by razzyb

Thanks for the file

press buttons........

**razzyb** · 31st October, 2019, 03:41 PM

car is live now. but still doesnt start few fault permanent fault codes in engine ECU and BSI
ECU status learnt
but it say waiting for BSI response
codes on ECU D118 , !693. E001. 0692

Vin was missing from BSI. so i added the VIN
Engine type in BSI unknown
BSI fault codes , B403, A4A1, F4BA, A4D4, F5FF, FA4A, FA58

their 3 possibilities. either flash is still not the right one or BSI need synchronization or BSI eeprom is corrupted. Thanks

**thayer201** · 31st October, 2019, 10:13 PM

Originally Posted by razzyb

car is live now. but still doesnt start few fault permanent fault codes in engine ECU and BSI
ECU status learnt
but it say waiting for BSI response
codes on ECU D118 , !693. E001. 0692

Vin was missing from BSI. so i added the VIN
Engine type in BSI unknown
BSI fault codes , B403, A4A1, F4BA, A4D4, F5FF, FA4A, FA58

their 3 possibilities. either flash is still not the right one or BSI need synchronization or BSI eeprom is corrupted. Thanks

Post your files ill take a look...

**razzyb** · 2nd November, 2019, 07:51 AM

here is flash after car died and current eeprom. Thanks

**razzyb** · 2nd November, 2019, 08:11 AM

here i full story. after initial pin read attempt checksum was corrupt. car was dead.
i identfy the BSI module as 44.01.

i had file backup from different fiat scudo which is 55FC. i uploaded that file in attempt to get the car going. car was live but didnt start.

after i uploaded Rafals file. car is still live but no start.

i think flash file with 55FC may have damaged the eeprom. I am not an expert in PSA.

if you could help me to get the car going. I can offer $50 AUD by paypal. Thanks for your help again

**razzyb** · 2nd November, 2019, 08:25 AM

IMG_20191102_150951.jpg IMG_20191102_151000.jpg

**rafal** · 2nd November, 2019, 09:12 AM

post ecu info....................

**razzyb** · 17th November, 2019, 12:35 PM

Hi Rafal and Boys,

I tried to read the ECU data in car byOBD. No success
so went and bought cluster, BSI and ECUfrom same year doner car.

Now I am struggling to change mileageon new BSI

fault with old bsi is confirmed thatwrong flash had altered the eeprom.
I read the eeprom file from new BSI.Put it in Tango. It worked with 2 keys and pincode showing. Where oldBSI file wasnt accepted by tango.

Your supplied flash worked. As I triedto change mileage with FVDI again reflashing damaged the Checksum.And restored the file all worked fine.
I use the online carprog website fromLithuania to change mileage on BSI 95128 eeprom. Donner mileage is411560 and it was showing 411557.
so went ahead paid 10 euros. Got newfile into BSI. And milage is still same. And reading milage with FVDIby OBD is still 411560.

so absolutely mileage is at differentlocation then carprogonline.com change the data.
I send email to Pauline at carprog. Butno reply for last 3 days

I bought tokens to tachsoft. Stilltachosoft showing milage 411557. so it will be waste of money if I gohead.
I tried OBDstar, no luck
tried hex editor to locate the data. Itseem encrypted to me( I could be wrong) .

Now I am out of options.

Doner BSI file and carprog modifiedfile attached.

If you guys could help. Would be great.

thanks