Bosch EDC17C69
Bosch EDC17C69
2WD Dyno , Magpro2 X17, FLEX Master , KESS Master , AUTOTUNER Master, Byteshooter Master, EVC Winols Reseller
Official Magicmotorsport DistributorCode:FILESERVICE: Tuning / DPF / EGR / Adblue / DTC / Immo
Official Autotuner Distributor
Official Alientech Distributor
looly (10th November, 2019)
flex, kess, ktag
2WD Dyno , Magpro2 X17, FLEX Master , KESS Master , AUTOTUNER Master, Byteshooter Master, EVC Winols Reseller
Official Magicmotorsport DistributorCode:FILESERVICE: Tuning / DPF / EGR / Adblue / DTC / Immo
Official Autotuner Distributor
Official Alientech Distributor
2019 vehicle + clone tool = not a good idea
2WD Dyno , Magpro2 X17, FLEX Master , KESS Master , AUTOTUNER Master, Byteshooter Master, EVC Winols Reseller
Official Magicmotorsport DistributorCode:FILESERVICE: Tuning / DPF / EGR / Adblue / DTC / Immo
Official Autotuner Distributor
Official Alientech Distributor
looly (11th November, 2019)
I agree, not sure if org kess can read this ecu or if it's also write only.
if this post was usefull
please press
the thanks button
Org Ktag "service mode" - no need to open the case. It has been working correctly for a week with edc17c69 from Iveco. Previously there were problems with the identification of the SW. In the description there is a photo of another EDC.
Iveco only.
looly (11th November, 2019)
with genuine tools you do it without opening, from pinout
looly (11th November, 2019)
No, only by bench!
Br.
Michael
looly (12th November, 2019)
Bookmarks