Hi
and you tried to upload another batch to this driver
Hello I have this car with this fault code. Can someone tell me where is problem.
VCDS scan:
Control Module Part Number: 6Q0 909 605 H
Component and/or Version: 03 AIRBAG VW5 0004
Software Coding: 12339
Work Shop Code: WSC 13765
VCID: 3C7782F02C6BAFAF8D-515A
3 Faults Found:
65535 - Internal Control Module Memory Error
00-10 - - - Intermittent
00532 - Supply Voltage B+
07-10 - Signal too Low - Intermittent
00588 - Airbag Igniter; Driver Side (N95)
32-10 - Resistance Too High - Intermittent
On PIN 26 I have 12V
And scan Engine
2 Faults Found:
17664 - Engine Coolant Temp Sensor (G62)
P1256 - 35-10 - Open or Short to Plus - Intermittent
18044 - Powertrain Data Bus
P1636 - 35-10 - Missing Message from Airbag Controller - Intermittent
Readiness: N/A
Last edited by alkazav; 12th November, 2019 at 03:20 PM.
Hi
and you tried to upload another batch to this driver
No I have'nt its. Do you have ?
Hi, did you try read file from airbag unit and checked ? Upload your file ...
You use srs units files at your own risk. I am not responsible for any damages. Don't ask about passes, one file=one pass.
If I helped, please, use magic buttons reputation+thanks.
Best regards.
Dragon
hi. I desoldered motorola hc08 from board but I cant read it with UPA . Today I try 3 hours but without success. Do you know corect way to red this mcu.
Bookmarks